JUKI JM-20 Hybrid Placement Machine Max PCB:410×560mmComponent Size:0603～50mmPlace Speed:15,500 CPHProduct description: JUKI JM-20 Multi Task Platform Hybrid Placement Machine, Max PCB:410×560mm, Component Size:0603～50mm, Place Speed:15,500 CPH
New Equipment | Education/Training
BEST SMT training kits feature REAL circuit boards that represent actual soldering conditions. These training kits feature 0.062in thick multilayer boards which are more representative of the thermal conditions of "real" circuit boards. This SMT tra
Electronics Forum | Mon Feb 18 04:08:50 EST 2002 | wbu
Never heard of billboarding. Could you please explain what that means according to 0603�s. Headshaking Wolfgang
Electronics Forum | Fri Feb 15 12:40:37 EST 2002 | MarkQ
I have some billboarding 0603's and I'm trying to find potential causes. Small boards 2"X 3". .060"thk Hasl surface.
Used SMT Equipment | Screen Printers
DEK Horizon 03i automatic stencil printer Specification ： DEK Horizon 03i High Precision Automatic Solder Paste Printer designed for high precision steel mesh printing or stencil printing in SMT industry. Printing PCB size: 50x50mm to 508x510mm;
Used SMT Equipment | SMT Equipment
Product Name:Panasoinc high speed chip mounter NPM Product number: NPM1 Detailed product introduction NPM multifunction machine, SMT machine, machine with function function function, check the dispensing machine, is a multifunctional equipment
Industry News | 2012-05-15 08:57:25.0
Practical Components Inc., a leading supplier of dummy components, has introduced a display case containing a sampling of components.
Industry News | 2014-04-08 13:08:59.0
IMS announced today that the A-0402WA attenuator is now available taped face-down in the pocket. The part number for this orientation is IMS2652. This taping arrangement has previously been available for the A-0603 (IMS2533) and A-0805 (IMS1141) sizes. Now all three of the most popular sizes of the A-Series are available in both face up and face down arrangements.
Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
Technical Library | 2021-08-25 16:28:36.0
In this study, a Sn–Bi composite solder paste with thermosetting epoxy (TSEP Sn–Bi) was prepared by mixing Sn–Bi solder powder, flux, and epoxy system. The melting characteristics of the Sn–Bi solder alloy and the curing reaction of the epoxy system were measured by differential scanning calorimeter (DSC). A reflow profile was optimized based on the Sn–Bi reflow profile, and the Organic Solderability Preservative (OSP) Cu pad mounted 0603 chip resistor was chosen to reflow soldering and to prepare samples of the corresponding joint. The high temperature and humidity reliability of the solder joints at 85 #14;C/85% RH (Relative Humidity) for 1000 h and the thermal cycle reliability of the solder joints from
Led bulbs production line in India 2019 July newly installed contact : skype id : peter.huang187 , Mobile : 0086-13610497541 email : leadsmtmachines@163.com
Career Center | Bangalore, India | Engineering,Maintenance,Production,Technical Support
SMT Stencil designing & Knowledge of full SMT process software known CAD/CAM -circuit CAM Pro 7.3,GC Power station, GCCAM Edit,Auto CAD, Fault finding of Electronic Boards & Servicing electronic machines.
| https://www.eptac.com/blog/judging-the-ipc-apex-soldering-competition
. Each contestant had thirty minutes to complete the board, seven (7) PTH LEDs, fourteen (14) 0603 resistors, one (1) two pin connector, one (1) 16 pin IC and one (1) jumper wire
Heller Industries Inc. | https://hellerindustries.com/wp-content/uploads/2018/07/pan_APEX06.pdf
(1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly
