Electronics Forum | Tue Dec 18 21:47:14 EST 2012 | jaimebc
So just to update and close this thread, it was the ZFIB board ( the one mounted on top of the theta motor) that was causing the theta motor to error out) Problem fixed. $ 30 dls or so from MYDATA. Hope this helps some one down the road.
Electronics Forum | Thu Aug 09 16:18:48 EDT 2018 | davef
Should threads "sunset"? Should threads over say, 2 months be closed to further replies?
Electronics Forum | Thu Feb 14 21:16:00 EST 2002 | davef
Has anyone looked at the economics of running a 2meg [min] DI water batch cleaner ... * Open loop * Closed loop What are the assumptions of your analysis? Our inclination is that it is not worth the money to set-up and maintain a closed looper.
Electronics Forum | Thu May 17 07:45:20 EDT 2018 | vikrantraina
We have Heller Reflow Model 1809 EXL. Today we opened it hood for internal cleaning but now not able to close them. Hood opened more from entry side. We tried to manually force open from exit side & check closing with open/close button, but hood comi
Electronics Forum | Tue Aug 27 13:52:24 EDT 2002 | Mike Konrad
MK, In most cases, if the machine is completely closed-looped (prewash, wash, prerinse, rinse, final rinse etc), then the water should not require changing. As with most inline cleaners, there should be a considerable amount of water loss in the cl
Electronics Forum | Mon Oct 27 16:28:18 EDT 2014 | hegemon
Thanks to the OP for the last post, closing the issue. So many times these threads can kind of tire out, and no one ever knows what the solution to the original problem was. Of course, that's the point of these forums. 'hege
Electronics Forum | Wed Nov 28 16:30:31 EST 2012 | rgduval
We've just acquired a batch washer at an auction, and want to install it as a closed loop system. The only problem is I have no idea where to turn or what to look for for a drain filtering system that will allow us to make it a closed loop system.
Electronics Forum | Tue Jan 11 20:04:24 EST 2005 | davef
We agree with you. We believe that there is no good to come from allowing postings to old threads. A few years ago there was an extended discussion on this here on SMTnet. * One camp wanted threads to be closed to further postings after a set perio
Electronics Forum | Tue Nov 08 17:12:10 EST 2005 | Erik
I haven't heard of heating boards pre-depanel either. We have done extensive studies on cracking of ceramic caps close to V-scored edges and have decided to have our board vendors pre-rout any areas with caps close (
Electronics Forum | Mon Mar 19 14:24:30 EDT 2007 | jdengler
I have been involved with the evaluation of close to a dozen pastes from 5 manufactures. I never found one that would rest on a board for anything close to 24 hrs and still have acceptable performance. Jerry