Industry News | 2003-03-10 08:41:03.0
provides an overview of the main features of both conduction coupling and radiated field coupling, the two primary RF immunity test methods.
Industry News | 2003-06-25 12:28:40.0
The chart includes a variety of diagrams, tables, and ratio charts for RF Emissions; Direct RF Power Injection; Bulk Current Injection (BCI); ESD and Transients; as well as TEM Cell and Stripline testing.
Industry News | 2003-05-21 08:21:19.0
Basic concepts for identifying the relevant contributions to uncertainty, and the calculation of total uncertainty from these contributions
Training Courses | | | IPC-A-610 Specialist (CIS) Recert.
The Certified IPC-A-610 Specialist (CIS) recertification courses are intended for those individuals who were previously certified as IPC-A-610 Specialists.
Industry News | 2003-06-13 09:56:46.0
Wire and spring specialist William Hughes can now offer three different versions of its PCB test point - small, large and long-legged in quantities suitable for prototype work or volume production.
Technical Library | 2023-08-14 09:06:53.0
In the operation of SMT mounter, the process and integrity of the nozzle of the mounter will have a significant impact on the performance of the machine. As one of the important components of the SMT machine, it is necessary for us to carry out daily maintenance and upkeep of the SMT nozzle. To ensure that the suction nozzle of the SMT machine is intact before operation, how should we do a good job of maintaining the suction nozzle of the SMT machine during normal use? KINGSUN technical team analysis operation has the following main points: 1.Wipe the surface of the SMT nozzle with a dust-free cloth. 2.The small aperture nozzle can be passed through with a thin steel wire and then blown with an air gun. 3.The surface of the nozzle should not be soaked with corrosive solution such as alcohol, as this may cause the surface to fall off. 4.HOLDER should use a cotton swab to wipe the cavity and not damage the filter screen. 5.Regular addition of special grease to HOLDER claws. 6.According to production, it is best to regularly maintain and do other maintenance regularly. (* Suitable for Yamaha SMT machine nozzles , JUKI SMT machine nozzles, Samsung SMT machine nozzles, Panasonic SMT machine nozzles, Fuji SMT machine nozzles, Siemens SMT machine nozzles etc.) Regarding the SMT machine nozzle daily maintenance operation instructions, KINGSUN share with you here , hoping to be helpful to you. More information about Products please Contact US at jenny@ksunsmt.com or visit www.ksunsmt.com , thanks.
https://www.ascen.ltd/Products/Component_lead_forming_machine/ Motorized version ASCEN taped component axial lead forming machine AS-809F axial lead former, use for cut and bend axial components braid resistor,capacitor, inductor, diode and other ele
https://www.ascen.ltd/Products/Component_lead_forming_machine/ Cut and bend machine for taped axial components. axial component lead former be often used the axial resistance and diode. This is the motorized type former, you can use this axial lead f
https://www.ascen.ltd/Products/Component_lead_forming_machine/ Motorized version ASCEN taped component axial lead forming machine AS-809F axial lead former, use for cut and bend axial components braid resistor,capacitor, inductor, diode and other ele
https://www.ascen.ltd/Products/Component_lead_forming_machine/ Motorized version ASCEN taped component axial lead forming machine AS-809F axial lead former, use for cut and bend axial components braid resistor,capacitor, inductor, diode and other ele
.gif)
.gif)
winsouce.jpg)