New Equipment | Board Handling - Storage
SDC-1001 Fast Super Dryer Ultra Low Humidity Dry Cabinet Specs: Model: SDC-1001 Fast Super Dryer Capacity: 657 Liters Humidity Range: LESS THAN 10% Recovery Time: Recovers to ≤ 10% RH within 30 minutes after accessing door for 30 seconds or less. Ex
New Equipment | Board Handling - Storage
Eureka SDC-501 Fast Super Dryer Ultra Low Humidity Dry Cabinet Specs: http://eurekadrytech.com/fast-super-dryer/sdc-501 Model: SDC-501 Fast Super Dryer Capacity: 372 Liters Humidity Range: LESS THAN 10% Recovery Time: Recovers to ≤ 10% RH within 30
Electronics Forum | Sat Apr 11 09:56:31 EDT 2009 | davef
You're correct. You should expect to see an intermetallic layer in a proper solder connection. Try leaving the component at temperature for a longer period. Growth of intermetallic compounds on Cu surfaces [Klein Wassink]: d = 10^3(exp(-5*10^3/T)t^1
Electronics Forum | Wed Aug 24 16:30:48 EDT 2005 | davef
Optical microscope or SEM work fine. You say, "I have found out that the method of measuring intermetallic compound(IMC) formation is quite questionable." What's the issue?
Industry News | 2018-10-18 09:42:39.0
SMT reflow oven process principle and introduction
Technical Library | 2010-04-29 21:40:37.0
The purpose of this paper is to investigate the effects of reflow time, reflow peak temperature, thermal shock and thermal aging on the intermetallic compound (IMC) thickness for Sn3.0Ag0.5Cu (SAC305) soldered joints.
Technical Library | 2014-07-02 16:46:09.0
Growth behaviors of intermetallic compounds (IMCs) and Kirkendall voids in Cu/Sn/Cu microbump were systematically investigated by an in-situ scanning electron microscope observation. Cu–Sn IMC total thickness increased linearly with the square root of the annealing time for 600 h at 150°C, which could be separated as first and second IMC growth steps. Our results showed that the growth behavior of the first void matched the growth behavior of second Cu6Sn5, and that the growth behavior of the second void matched that of the second Cu3Sn. It could be confirmed that double-layer Kirkendall voids growth kinetics were closely related to the Cu–Sn IMC growth mechanism in the Cu/Sn/Cu microbump, which could seriously deteriorate the mechanical and electrical reliabilities of the fine-pitch microbump systems
A technology that identifies the intermetallic compound formation, enables the system to provide closed loop feedback to the operator and validates the condition of the solder joint. This technology works in conjunction with SmartHeat® and patented C
A technology that identifies the intermetallic compound formation, enables the system to provide closed loop feedback to the operator and validates the condition of the solder joint. This technology works in conjunction with SmartHeat® and patented C
Events Calendar | Wed Mar 18 00:00:00 EDT 2020 - Wed Mar 18 00:00:00 EDT 2020 | College Park, Maryland USA
CALCE Reliability Science Symposium - Spring 2020
SMTnet Express, October 5, 2017, Subscribers: 30,900, Companies: 10,753, Users: 23,894 Intermetallic Compounds In Solar Cell Interconnections Including Lead-Free, Low Melting Point Solders Torsten Geipel, Achim Kraft, Ulrich Eitner - ISE , Monja
Effects of reflow profile and thermal conditioning on intermetallic compound thickness for SnAgCu soldered joints. Effects of reflow profile and thermal conditioning on intermetallic compound thickness for SnAgCu soldered joints. The purpose
| https://www.eptac.com/webinar/how-to-create-the-perfect-solder-joint/
. Topics we will be reviewing are: The definition of intermetallic compounds. How they occur in the soldering/manufacturing process. Critical characteristics and how they change over time
Surface Mount Technology Association (SMTA) | https://www.smta.org/knowledge/proceedings_abstract.cfm?PROC_ID=4722
. Because of the small volume of solder employed, intermetallic compounds comprise a significant fraction of the resulting solder joint, and very fine Ag3Sn precipitate morphologies can occur
winsouce.jpg)
