Industry News | 2012-01-13 13:27:59.0
The SMT stencil market has a slew of new options in foil materials, coatings and cutting technologies, all of which promise to improve the solder paste printing process. Which of these options really do help assemblers keep yields up and costs down, and which don’t?
Industry News | 2012-01-22 23:16:58.0
More than 350 engineers who attended last week’s IPC webinar, Soldering and Assembly Defects, were polled on their biggest headaches with printed boards, PCB components and PCB assembly process failures. The survey results which identify solder finish, ball grid array (BGA) components and reflow soldering as the greatest challenges, provide webinar co-sponsor, National Physical Laboratory (NPL) of the United Kingdom with useful information as it prepares its NPL Process Defect Clinic for IPC APEX EXPO® 2012.
ETA Industrial Pure Water Machine ETA-DI250 If you could not find any similar items you want, you may send some photos to us. because our catalog and website haven't included all of our products. PCBA Cleaning Machine, On-line PCBA Cleaning M
Industry News | 2018-12-08 03:29:29.0
SMT Dictionary – Surface Mount Technology Acronym and Abbreviation
Industry News | 2013-11-05 23:02:54.0
Nordson ASYMTEK will introduce the Spectrum™ II at Productronica this year, marking the 6-year anniversary of the introduction of the Spectrum series of high-speed, high-accuracy dispensing platforms. The Spectrum II S2-900 Series leverages the same small footprint of 600mm x 1321mm as the original Spectrum to provide maximum productivity with minimum manufacturing floor space, but improves the precision, accuracy, and speed of the system to rival much larger platforms.
New Equipment | Solder Materials
Whether you are a hobbyist, sheet metal fabricator, or an electronics assembler, StellarTechincal.com provides quality solder for you, including lead-free solder wire. When you shop online at our business, you’ll be able to get a solder bar, babbit f
Technical Library | 2016-02-11 18:26:43.0
Although reflow ovens may not have been dramatically changed during the last decade the reflow process changes step by step. With the introduction of lead-free soldering not only operation temperatures increased, but also the chemistry of the solder paste was modified to meet the higher thermal requirements. Miniaturization is a second factor that impacts the reflow process. The density on the assembly is increasing where solder paste deposit volumes decreases due to smaller pad and component dimensions. Pick and place machines can handle more components and to meet this high through put some SMD lines are equipped with dual lane conveyors, doubling solder paste consumption. With the introduction of pin in paste to solder through hole components contamination of the oven increased due to dripping of the paste.
Industry Directory | Manufacturer
The Future of Electronics is here - With Squink at your Desktop, print and assemble PCBs in minutes instead of weeks for less than a cup of coffee. Go from CAD design to PCB without the pain and cost.
Technical Library | 2020-11-24 23:01:04.0
The miniaturization trend is driving industry to adopting low standoff components or components in cavity. The cost reduction pressure is pushing telecommunication industry to combine assembly of components and electromagnetic shield in one single reflow process. As a result, the flux outgassing/drying is getting very difficult for devices due to poor venting channel. This resulted in insufficiently dried/burnt-off flux residue. For a properly formulated flux, the remaining flux activity posed no issue in a dried flux residue for no-clean process. However, when venting channel is blocked, not only solvents remain, but also activators could not be burnt off. The presence of solvents allows mobility of active ingredients and the associated corrosion, thus poses a major threat to the reliability. In this work, a new halogen-free no-clean SnAgCu solder paste, 33-76-1, has been developed. This solder paste exhibited SIR value above the IPC spec 100 MΩ without any dendrite formation, even with a wet flux residue on the comb pattern. The wet flux residue was caused by covering the comb pattern with 10 mm × 10 mm glass slide during reflow and SIR testing in order to mimic the poorly vented low standoff components. The paste 33-76-1 also showed very good SMT assembly performance, including voiding of QFN and HIP resistance. The wetting ability of paste 33-76-1 was very good under nitrogen. For air reflow, 33-76-1 still matched paste C which is widely accepted by industry for air reflow process. The above good performance on both non-corrosivity with wet flux residue and robust SMT process can only be accomplished through a breakthrough in flux technology.
Industry Directory | Manufacturer
Shenzhen Huancheng Automation equipment Co.,ltd (referred to as the "HC"), a High-speed developing enterprise specializing in High Precision Automatic Solder Paste Printer research and development.
.gif)
