Electronics Forum | Wed Apr 18 09:31:24 EDT 2007 | aj
Hi, Can you advise the footprint dimensions used on the PCB ? Thanks, aj...
Electronics Forum | Thu Apr 12 09:13:41 EDT 2007 | aj
Hi all, What stencil aperture designs do you use for 0402 components? Thanks in advance for replies. aj...
Electronics Forum | Tue Apr 17 17:30:09 EDT 2007 | jaimebc
Our experience with leaded paste and SAC305, for 0402's, has been positive with the following stencil designs: 1.- 5 mil thickness. 2.- Home plate design. Hope it helps.
Electronics Forum | Sat Apr 21 21:02:30 EDT 2007 | mika
Yes we can (at least show something that work for us) but hey, not possible to attach some pictures here... We don't have any problem with 0402:s on OK Corral... / Ps. Just get up mischief. Ds.
Electronics Forum | Sat Apr 14 04:33:44 EDT 2007 | aj
the footprint is IPC standard which I have found to be less forgiving than the Jedec one for tombstoning. Enig finish - 5 thou stencil. We have historically used homeplate design but I am leaning towards 1:1. Leadfree application. aj...
Electronics Forum | Wed Apr 25 16:33:09 EDT 2007 | aj
Hi All, Thanks for all the replies. I went with 1:1 (ENIG Finish) and the results were very good. aj...
Electronics Forum | Tue Apr 24 02:56:12 EDT 2007 | chrispy1963
If the PCB you are using is a HASL pad finish and is a leaded assembly, we use homeplate pads with a 5 mil stencil. If the circuit has Enig finish and is PB-Free then we use 1:1 apertures with a 5 mil stencil Either method should provide no solde
Electronics Forum | Thu Apr 12 09:50:51 EDT 2007 | pjc
There have been many designs of apertures for 0402, round, home plate, inverted home plate and various reduction amounts for square or rectangular apertures. What works best for a given application depends on PCB design, solder land finish, stencil t
Electronics Forum | Thu Apr 12 10:01:43 EDT 2007 | realchunks
Hi aj, Pete is right, there are several variables that can affect your quality when it comes to stencil design. A good idea is to have a stencil made with various designs incorporated into it. A lot of engineers like the reverse homeplate design.
Electronics Forum | Mon Apr 16 09:13:16 EDT 2007 | pjc
Tombstone head and a graveyard mind. I would not recommend 1:1 due to solderpaste beed out opportunities. Have you tried the inverted home-plate? Here are some good links on tombstoning and how to eliminate it: http://www.aimsolder.com/technical_ar
.gif)
winsouce.jpg)