Electronics Forum | Mon Oct 04 10:24:51 EDT 2010 | jdumont
Anyone have any experience with them? Looking for a 1 or .5 meter conveyor and possibly a loader. Good prices for new equip, wondering if there is a reason why?
Electronics Forum | Fri Mar 24 08:10:12 EST 2006 | mapell
Hi AR Nice job on the chain/rail cleaning. I would contact Speedline Electrovert tech support, 800.737.8110 to assist in trouble shooting. They can walk you through using a meter to measure input and output current to the SC card and make sure tha
Electronics Forum | Tue Nov 02 15:57:20 EDT 2010 | g2garyg2
Anyone have any experience with them? Looking > for a 1 or .5 meter conveyor and possibly a > loader. Good prices for new equip, wondering if > there is a reason why? PROMATION has the best price on new 1M and 600 mm conveyors. They are often
Electronics Forum | Tue Aug 11 15:58:10 EDT 2020 | gilbe12586
Looking for FUJI CDC-4200-2 conveyor manual, belts, and bearings.
Electronics Forum | Mon Jan 15 15:18:13 EST 2007 | jaimebc
We have an oMniflow 7 as well, and looking at the calibration procedure, it indicates that turning the pots ( total of 5 pots. 4 on the lower board and one on the upper board )fully counter-clockwise is the FIRST step of a series of tests. Then you w
Electronics Forum | Thu Jul 22 07:30:21 EDT 2010 | nitronica1
does anyone know where I can get replacement conveyor/drive belts for a Fuji/astro pcb 0.5m conveyor? pref from the UK or europe the length of the belts are approx 630mm and 6mm wide, flat with bumps on bottom side
Electronics Forum | Sun Jul 25 00:59:47 EDT 2010 | smellew
llew@SurfaceMountEngineering.com Sales@SurfaceMountEngineering.com Web: http://www.SurfaceMountEngineering.com
Electronics Forum | Mon Oct 06 18:24:34 EDT 2003 | pjc
what type of belt is it and what material is it? round belt, flat belt, etc... if its from a PCB transport conveyor or other PCB handling system, I recommend you contact the OEM. I have spliced belts before- rubber round belt off old Fuji loader and
Electronics Forum | Tue Sep 01 10:55:41 EDT 2015 | emeto
Hi, 1. Take a multi meter and measure the voltage - I assume it is a DC motor(probably 24V). If you don't, check power supply,cable, relays and Driver for the motor. If you do have voltage, check sensors(sometimes sensor activated may stop your con
Electronics Forum | Tue May 06 07:29:10 EDT 2008 | cyber_wolf
I am looking at NEW connecting conveyors for our Fuji lines. So far I have looked at Simplimatic,Promation,and Jot. There seems to be a large spread in pricing. Has anyone out there purchased new conveyors lately..if so what is your take on it ? I
