Electronics Forum | Thu May 04 16:00:07 EDT 2000 | Nick
A Machines reliability will remain the same If it places 25 parts or 25,000 parts. It has nothing to do with "how many parts" but on the repeatability of the machine type. You would notice less misplacements on a low count PBC due to seeing less comp
Electronics Forum | Wed Mar 30 14:51:19 EST 2005 | Cmiller
We are looking at switching to UV cure for faster throughput. Does anyone know of any cost effective coating manufacturers? The pricing we are getting back are around $250.00 a gallon in 5 gal pails. This is more than twice what we pay for our curren
Electronics Forum | Wed Sep 07 10:44:57 EDT 2005 | Rob
True, but we were doing 25,000 boards a day. We never did see any delamination issues, but we did only press-cut the breakout tabs.
Electronics Forum | Thu Apr 19 07:26:42 EDT 2007 | bartlozie
Hello, I was talking about the PACE TF 2700 rework station. price about 25.000 euro. kind regards
Electronics Forum | Fri Jun 27 11:46:46 EDT 2003 | dgjjr
I talked to a flexlink rep yesterday and had him run it down (I'm looking at some used PCT equipment). He says flexlink currently has parts and technical support for PCT products. That support however will start to erode very quickly. PCT parts ar
Electronics Forum | Fri Mar 16 14:48:59 EDT 2007 | drt
I noticed a difference in the specifications from the Japan web site to the US site. IPC9850 Speed in Japan is 25,000. US is 27,000. Accuracy in Japan is stated at 50 microns at 3 sigma. US is stated at 40 microns at 3 sigma. 01005 capability is di
Electronics Forum | Fri Oct 30 06:48:19 EDT 2009 | leadthree
Is there any official or in-official in-house standard for ICT pin maintenance on volume boards? Like, how many test can or should one pin do? Currently we just change when we get contact problems. That probably after 5000 tests or so. But I guess
Electronics Forum | Tue Feb 05 19:00:18 EST 2013 | marcelorotofrance
I found problem, it was a faulty connector on the align processor card. So, Mr. Bobpan, I thank you very much for your invaluable guidance. P.S. My employer has been very clever and have purchased a 18 years old/ 25000 run hours/ third-hand equipmen
Electronics Forum | Thu Nov 20 11:28:41 EST 2014 | markhoch
I've spoken with a number of Engineers about this subject and there didn't seem to be a consensus number. In my own experience, I found that we were replacing the stencils after approximately 30,000 print strokes. In my predictive maintenance spreads
Electronics Forum | Fri Jun 04 21:21:04 EDT 2004 | johnwnz
Hey folks, time to put the collective brain into motion. I need to source a conformal coating machine for some medium volume production of assorted PCBA's. I'm looking for something that's easy to program, accurate, good running costs and all that g
