Electronics Forum | Thu Sep 12 15:58:02 EDT 2002 | stepheno
It's been years since I worked with a Fuji. I only once resorted to the undocumented part class 255 (or whatever they call it) and that was when I was working midnight shift. The smaller nozzle working better than the larger nozzle makes me wonder a
Electronics Forum | Fri Mar 27 06:16:24 EST 1998 | mancheol,seo
Hello everyone~! I wonder becasuse of stencil board size. My component dimension is 200 x 200mm What the board size I choose? Please let me know solution... best regards man from korea
Electronics Forum | Thu Jan 28 11:56:53 EST 2010 | alexino76
Yes, u're right... U can do with Flexprogram; this is the dos based program that convert a zevatech file in a txt file or viceversa. You simple convert your PM file as txt and reconvert as FM740 format (g3g). After conversion u have to complete compo
Electronics Forum | Fri Dec 29 12:46:24 EST 2006 | realchunks
Crappy piles? Weren't they a hard rock band in the 80's? I know on most of our boards the little silk screen dot is just the component identifier in really small font when looked at in Gerber. But this dot isn't very big, so I see how it can affec
Electronics Forum | Wed Jul 09 10:15:57 EDT 2008 | aj
I have carried out some further measurements on the device and the results are as follow: Component Lead width measures 183 microns. Actuals PAD width measures 158 microns. What I am thinking is that the lead is attracting the solder hence prevent
Electronics Forum | Fri Apr 12 17:10:41 EDT 2002 | davef
Consider: * Finding JEDEC [ http://www.eia.org/jedec/ ] publication that includes matrix trays is: �JEDEC Publication No.95 Registered and Standard Outlines for Solid State and Related Products�. * Contacting tray manufacturers [ie, Peak, Summit, Nep
Electronics Forum | Fri Sep 13 13:28:58 EDT 2002 | stepheno
I guess no one at ECD reads this forum. They make a clip-on thermocouple prob. Where I used to work we had 3. At first I thought they were very awkward to set up. But once you practise a bit and get used to the right hand thread tightening screw
Electronics Forum | Mon Sep 26 18:53:30 EDT 2016 | chabscan
Could it be possible in my Quad 4c, to increase component size tolerance to reduce the rejection of components? Could this have an impact in the event of the machine picking a component off center? As in if the machine picks a compnent off center but
Electronics Forum | Tue Sep 27 11:43:32 EDT 2016 | tnisbet
Yes you can open the tolerance, and that’ll usually work for a bit. Is the LAE is linked to multiple parts? If so, then the easiest thing is to open the tolerance. If not, that’ll require another route to try. Is it happening to all of the components
Electronics Forum | Thu Jul 22 15:35:43 EDT 2004 | C.W
have you searched thru the component spec.? the component manufacturer should have the foot print guide line.
