Electronics Forum | Tue Aug 22 08:52:39 EDT 2000 | genesmelik
Good morning Dr. Lee. I was wondering how flux chemistries have changed, or will change, with the transiton to Pb-Free, given the higher reflow temperatures required for SMT assembly?
Electronics Forum | Fri Aug 01 23:43:52 EDT 2003 | Yngwie
Thanks Dave, the residue appeared to be similar to fungus. First, I thought it could come from water soluble flux but, our plant only runs no-clean. So, can I concluded that this greenish "fungus" looking staff is not initiated from high hot air temp
Electronics Forum | Sat Aug 02 08:12:05 EDT 2003 | davef
Q: So, can I concluded that this greenish "fungus" looking staff is not initiated from high hot air temperature setting ? A: Your temperature setting could have increased the growth rate of this crunchy looking stuff, but we wouldn't start there to
Electronics Forum | Thu Jul 31 11:33:51 EDT 2003 | yngwie
I faced problem over connecter's pin that were hot air soldered. This connector has 168 pins ( similar to the straddle connector ). The process is to apply the flux onto the connector's J-leads, and the hot air pencil were then ran thru' the leads to
Electronics Forum | Wed Sep 25 20:23:44 EDT 2002 | davef
Federal Specification GGG-P-463c "Granite Surface Plates" defines the three standard grades of tolerance for surface plates as follows: * AA - Laboratory Grade: For high precision operations in consistent temperature gauging rooms and metrology depa
Electronics Forum | Thu Jul 31 15:41:23 EDT 2003 | davef
Q: Could any of you guys tell me what exactly is this greenish thing ? A: No, but is not copper oxide. Copper oxide is brown, the color of a penny [here in the US] or an untreated copper laminated trace on a board. Many copper salts are greenish in
| 1 |
.gif)
