Electronics Forum | Thu Mar 01 14:13:23 EST 2007 | Brandon
We have a bunch of used solder paste we need removed from our facility. Who provides this type of service for a fair reasonable fee? We are in Austin, Texas and use loctite solder paste. Our supplier is Hisco, but they only provide this service for A
Electronics Forum | Fri Apr 13 15:42:18 EDT 2007 | flipit
This is sort of interesting. We had a clock problem with Alpha OM-338 lead free paste. The flux residue was causing a clock problem and the clock was only a few KHz. We went back ot OM-5100 lead paste and the problem never occurred again. Chris
Electronics Forum | Wed Jan 03 14:19:12 EST 2007 | muse
Have you checked out Alpha Wire Co. FIT-Print tubing? http://www.alphawire.com/pages/141.cfm I don't know if this is what you are looking for or not.
Electronics Forum | Thu Feb 15 13:47:16 EST 2007 | russ
They are all compatible with each other. Data is at alpha metals website and FCT assembly Russ
Electronics Forum | Sat Mar 24 07:50:04 EDT 2007 | davef
It's possible that 90/10 is being replaced by LF in many ball suppliers' [Alpha Metals, Kester, AIM] inventories.
Electronics Forum | Mon Apr 30 06:44:34 EDT 2007 | dszeto
Is there any benchmarking / report available on the industry regarding to the application of leadfree solder Sn(99%)/Ag(0.3%)/Cu(0.7%) e.g. Alpha Metals SACX0307 compared to SAC305? Thanks! Daniel
Electronics Forum | Sun Sep 02 13:45:06 EDT 2007 | mun4o
Hi, we use om338 from alpha metals in our smt production lines.I wont change this solder paste with kester em 918.Is anybody use this solder paste?what yo think abaout this paste.Is it good?
Electronics Forum | Fri Apr 13 12:24:07 EDT 2007 | teamcanada
We assemble for a customer that is having an inconsistent low level analog interference we believe with the no clean flux residue from Alphas OM5100 solder paste. We are considering testing Amtechs 4300 water washable no clean paste. We will test bot
Electronics Forum | Wed Apr 04 10:48:25 EDT 2007 | pjc
Indium Corp. has some, 3549-HF and 3590-T, both are OK for foaming. Most of the better performing newer fluxes require spray application for best performance. Alpha, Kester and others have wave fluxes too. http://www.indium.com/products/circuitboar
Electronics Forum | Fri Apr 20 03:41:50 EDT 2007 | aj
Hi All, We did not change our internal Solder pot components (stainless steel)when we switched to Leadfree Alpha SACX . Running approx: 1 year now and I carried out checks yesterday and we have some signs of erosion. Did not expect to see this so s
.gif)
winsouce.jpg)
