Electronics Forum | Mon Jul 30 12:45:00 EDT 2018 | mdkmdr
Trying to get a sense of the push-pull going on between designers and manufacturers on the subject of 'one test point per net'. Getting a feeling like the new paradigm is doing all of the electrical tests as functional at EOL and relying almost comp
Electronics Forum | Tue Jul 31 04:45:42 EDT 2018 | robl
Depends on what sort of outfit you are working for, and what you are building. A lot of CEMs are doing Flying Probe or ICT on the boards ahead of investing time building into units or adding parts that prevent access to rework. We have a combination
Electronics Forum | Thu Jul 28 18:53:32 EDT 2011 | rway
Make sure your system is not in bypass mode (under conveyor setup). Also, the intermittent SMEMA signal can cause the conveyor to turn on until it times out. Check your sensor on the upstream conveyor. Cover it and check your diagnostics to ensure
Electronics Forum | Wed May 15 08:04:27 EDT 2024 | james2024
Hello, The fiber optics cable appears to be functioning correctly; transmission is evident through the blinking LEDs, and the computer can read the status of all transport sensors. I have managed to identify an error in the logs. Please use the foll
Electronics Forum | Mon Jan 25 14:26:38 EST 2016 | stevea
You are correct about KY having the lions share of 3D AOI in the industry. They were 2-3 years ahead of everyone else to entry, but the gap is closing quickly as the overall capability of KY does not justify their higher price. On the SPI front, Cyb
Electronics Forum | Mon Nov 08 13:14:35 EST 2010 | rway
If you are just wanting to test the values of the electrolytics or tantalums, it's not a problem with an ICT, as long as your system has an analog instrument to do it. If you are wanting to test the polarity of the cap, you will need a capacitive co
Electronics Forum | Mon Apr 29 08:08:57 EDT 2024 | radek
Hello, The fiber optics cable appears to be functioning correctly; transmission is evident through the blinking LEDs, and the computer can read the status of all transport sensors. I have managed to identify an error in the logs. Please use the foll
Electronics Forum | Wed Feb 18 10:42:15 EST 2015 | stevea
The surprise to me with this entire post is why CyberOptics (USA) has never come up in this conversation. The new SQ3000 will change the 3D AOI market for the better with their MRS technology. I have witnessed the image quality from this new sensor
Electronics Forum | Fri Apr 26 08:20:51 EDT 2024 | radek
Hello, We recently acquired a used Viscom S6056 DS1W machine which is currently not operational. The initialization fails and we are encountering a repeated error: "D0, Vtrans command invalid." This error is also appearing with codes D4, D5, and D6.
1 |
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723