Electronics Forum | Tue Aug 31 18:34:32 EDT 2010 | aqueous
If the batch cleaner is truly closed loop, then 100% of all of the process fluid (water) is captured, filtered (particulate, carbon, resin) and reused. This answer is based on a traditional closed-loop batch cleaning system with an integrated water
Electronics Forum | Tue Jul 10 18:03:49 EDT 2001 | pzohbon
Does anyone have a recommendation for a cleaning solution used in an ultrasonic cleaner for cleaning RMA solder paste off stencils and adhesive off pcb boards. I am going to be evaluating Armakleen 2001, Zestron Vigon SC 200, and Aqueous Technologies
Electronics Forum | Fri Nov 03 15:55:47 EST 2000 | CAL
John- We are curently running an Aqueous Technologies AQ201sc Stencil Cleaner with Zestron A200 Chemisrty and are really please with the unit and cleaning capabilities. Aqueous Technologies contact Joe Herr 800-218-8128. Zestron contact Andreas M�hlb
Electronics Forum | Thu Nov 21 11:10:07 EST 2013 | luciano
Hello, We've just started using VIGON A200 in our Aqueous Trident XLD system and observed that aluminium electrolytic capacitors get corroded. Concentration was set at 20% and washing is done by spray at 150F for 6 to 8 minutes. Then is rinsed seve
Electronics Forum | Tue Jan 17 10:29:10 EST 2006 | Mike Konrad
Armakleen is compatible with CPVC as are most aqueous-based chemistries. Armakleen, in its day was a superior chemistry. It was the first of the aqueous blends to offer bright solder joints (earlier saponifiers commonly dulled solder joints). Arma
Electronics Forum | Wed Feb 26 23:59:48 EST 2003 | Mike Konrad
Grant, No-Clean paste + IPA = White Residue! #1: Stop using IPA #2: Switch to either a solvent-based de-fluxing chemical or an aqueous-based de-fluxing chemical. If you are using an ultrasonic cleaner for your boards as stated, do not use sapon
Electronics Forum | Mon Oct 30 14:27:49 EST 2006 | pjc
Not really. A new Electrovert AquaStorm 100, in-line machine, is under $60K, for straight aqueous applications. The batch type from Aqueous Tech are like $35K I believe. $120K would be for a high performance in-line machine, such as the AquaStorm 200
Electronics Forum | Wed Apr 24 21:34:01 EDT 2002 | davef
Search the fine SMTnet Archives. Guidelines * Control: Flux specific gravity, preheater temp, conveyer speed, solder temperature. * Two most important parameters are: solder temperature & dwell time * Contact time. The optimum contact (dwell) time
Electronics Forum | Fri Nov 12 11:05:04 EST 1999 | Mike Konrad
You may want to consider Zestron's Vigon SC200 (703) 589-1198. Many of our customers use this chemical with great success. Another alternative is Hydrex from Petroferm (904) 261-8286. Good Luck, Mike Konrad Aqueous Technologies Corporation
Electronics Forum | Tue May 20 19:48:19 EDT 2008 | davef
Here's one way to think through your choices ... 3 Saponifier / non saponifier 3a Saponifiers: * Aqueous Technologies: PCB-Wash http://www.aqueoustech.com * Kyzen: XJN http://www.kyzen.com * EnviroSense: Enviro Gold #816 http://www.envirosense-inc
winsouce.jpg)