Electronics Forum | Tue Apr 25 13:55:36 EDT 2000 | Rob Cass
Sequenced tape and reel I have talked with several companies, regarding sequence taping and reeling of axial components. However, non-are capable of SEQUENCING tape and reels for axial insertion. Please let me know of any companies that SEQUENCE.
Electronics Forum | Thu Apr 27 18:51:35 EDT 2000 | Doug Philbrick
Rob We could do that for you as well as provide you with a ready to run insertion program for your Universal Axial inserter that will of course match your sequences. You can call me at 770 965-3300. I will be out in the morning on the 28th but will
Electronics Forum | Wed Mar 03 13:50:37 EST 2004 | gregp
The root cause of your problem is your placement equipment. It is not designed for continuous production during component replenishment. Feeders that can be removed, reloaded, and placed back on the machine while the machine is running (without mis
Electronics Forum | Fri Aug 25 15:44:00 EDT 2000 | Gilbert Ramirez
One of our distributors currently uses PSA cover tape. This has given us too many problems. We are in the process of trying to decide wether or not to fund them with the money they need to be able to use HAA process(they currently have capability). C
Electronics Forum | Fri Sep 27 15:07:50 EDT 2002 | barryg
Genny, you may want to look at the brds you will be running and identify the various packages. I do not know what a standard package is. Most chip resistor and capacitors, 0402, 0603, 1206, 1210's are on 8mm feeders, but ic's vary quite a bit. Also r
Electronics Forum | Thu Dec 15 04:26:20 EST 2005 | Rob
Hi Liza, We tend to see it on the larger plastic tape sizes & lower volume parts - such as smd connectors, fine pitch reeled IC's, BGA's etc. We don't tend to get it on high vol parts such as logic, 8 & 16bit micros, v-regs etc. Could this be du
Electronics Forum | Mon May 15 13:55:00 EDT 2000 | Aldo
We are in the process of researching manual or low cost automatic Tape and Reel equipment. I have heard about V-tek and Systemation. I would appreciate if someone can tell me any problems or virtues of theses two brands that have been experienced. Al
Electronics Forum | Wed Jan 17 14:13:31 EST 2007 | jax
You might want to try going to the manufacturer about getting a refurb unit with a warranty. All of the manufacturers listed provide refurbished equipment deals that can be packaged with feeders. If you go with a broker or 3rd party rebuild hous
Electronics Forum | Thu Feb 06 11:41:40 EST 2014 | EricW
Years ago I received a sample of adhesive dots that were on tape and reel and could be pick n placed with standard equipment and withstood reflow. I have a current need for these and cannot remember a vendor or manufacturer. Does anyone know of this
Electronics Forum | Wed May 24 17:09:05 EDT 2000 | Chris McDonald
We have A V-Tek using pressure sensitive cover tape but the only success that we have found is with SO-8, S0-14, SO-16 anything wider and the tape pulls apart when on our feeders. ANything over 16 wide is not recommened unless you get a heat sensitiv
