Electronics Forum | Wed Jan 01 22:19:33 EST 2020 | sssamw
Solder ball attached on solder joint without violation minimum electrical clearance is acceptable. If your process parameter including stencil not changed, suggest you check if solder pasted being pushed out after IC placement, also check if solder j
Electronics Forum | Thu Jun 06 15:55:28 EDT 2002 | arzu
I agree with the others and experienced the problem myself this week. Solderballs at the side of the chips. I looked at the board and found that the chip is pressing the paste away too much. This in combination with our quite big pads(and stencilaper
Electronics Forum | Tue Jun 04 20:34:28 EDT 2002 | russ
Jason, Excessive thermal ramp rates, misprints, improper pad design, paste type, placement pressure, all can cause solderballs. Do the pads on this board meet IPC 782 criterias? I have found that too much pad underneath component can cause this. A
Electronics Forum | Thu Nov 18 09:25:42 EST 2004 | pjc
Vanguard is a ball placement machine. They are out on Long Island NY and manufactured by White Eagle Engineering. The contact person is Pete Heinzl 520-791-0239, pheinzl@whiteeagleeng.com
Electronics Forum | Fri Sep 23 03:52:41 EDT 2005 | dougs
Hi, Does anyone know if it's possible to place BGA's with pitch 0.5mm and ball diameter 0.25mm on a siemens F3. the manual says that smallest pitch on BGA's is 0.56mm. Siemens won't commit a yes or no, as you'd expect, but i'd have thought it w
Electronics Forum | Thu Aug 24 15:37:50 EDT 2006 | Chunks
Hi Any, This is from an earlies thread "Solder Ball After Reflow Process". Date: August 16, 2006 01:52 PM Author: Russ Subject: Solder Ball After Reflow Process Oven settings are meaningless here. What does the board see? It is the paste we a
Electronics Forum | Wed Apr 27 01:20:22 EDT 2005 | Frank
Are you sure about your dimensions? .45mil ball diameter and .8mil pitch, and a body size of 16x8mils is really, really tiny. I assume you mean millimeters and not mils? 1mil = 0.0254millimeters If your stencil is 5mils and your ball diameter is
Electronics Forum | Fri May 26 21:25:52 EDT 2006 | mika
Yes we do place "big and heavy" SMT DC/DC:s on most of our board's. Please tell us what brand it is or at least what the package look like?!? For instance we place a different numbers of "heavy" DC/DC converters (40x20mm & 45x25mm) that has the pick-
Electronics Forum | Wed Aug 22 09:17:15 EDT 2001 | steven
if do not have x-ray inspection machine, how to verify the 1st board out from the smt placer that the BGA is placed accurately onto the solder pads. the diameter of the solder ball is 1mm. could it self align during reflow?
Electronics Forum | Tue Jul 13 00:40:44 EDT 2004 | Darren
Yes of course we are doing placement of BGA's with an IPII. However there is no front lighting so you can not inspect the balls. If the silhouette is square enough there is no problem with alignment. Just use the largest nozzle that will fit on the p
.gif)
