Electronics Forum | Sun Mar 03 22:15:13 EST 2002 | caldon
RPS (Robtic Process Systems - I think) Makes a system called a Wet Balance tester. This machine is useful for Solderability on PCB sections and Components. Also for more info please go to http://www.empf.org/html/empfset.htm and down load Decemeber
Electronics Forum | Mon Jan 23 03:12:13 EST 2006 | adeline_ko
The FA department is using IPC or J-STD-003 to do the solderability test for the leaded PCB FA qualification. Class A. However, there is no mention of Lead free testing for the PCB bare brd. Can anyone advise whether IPC has release a solderability
Electronics Forum | Mon Jan 23 20:58:08 EST 2006 | davef
J-STD-003B - Solderability Tests for Printed Boards is currently a "Working Draft". Look here: http://www.ipc.org/status.asp
Electronics Forum | Tue Apr 12 12:08:06 EDT 2005 | Dave G
I use the solder sample pcb that comes w/ each batch of boards. We ask our pcb vendor to send 1 pcb for solder testing w/ each batch. This is usually a pcb that is completely done it just didn't pass electrical test @ the final stage. I kill two bird
Electronics Forum | Mon Mar 12 08:00:14 EDT 2007 | rgduval
It sounds like you may be thinking of two different test methodologies. What is required? Bare-bard testing, to verify pcb fabrication? Or populated board testing, to verify manufacturing? If it's bare board testing, the fab house should advise a
Electronics Forum | Mon Mar 12 08:06:44 EDT 2007 | davef
Q1.� is it mondatory to test all components and paths in the PCBA; and check all soldering joints? A1. Nothing is mandatory. You do ICT to prove some component functionality and check manufacturing process. ICT test coverage is driven by factors i
Electronics Forum | Mon Mar 12 03:41:25 EDT 2007 | tanemmirt
i designed a new product; i want to produce it in china, so they requested the ICT to be done; i have 03 questions if some one can help me on: 1� is it mondatory to test all components and paths in the PCBA; and check all soldering joints? 2� testing
Electronics Forum | Tue Mar 13 04:43:57 EDT 2007 | tanemmirt
thanks a lot robqd3 and davef for your assistance,just a littel question concerning testing soldering joints, is it enough to ask the producer to test all my soldring joints without modifying any thing in the ciruit (( adding vias etc...)) if i ha
Electronics Forum | Tue Mar 13 07:39:19 EDT 2007 | tanemmirt
thanks a lot robqd3 and davef for your assistance,just a littel question concerning testing soldering joints, is it enough to ask the producer to test all my soldring joints without modifying any thing in the ciruit (( adding vias etc...)) if i have
Electronics Forum | Thu Jun 17 21:24:32 EDT 1999 | Dean
| first of all what is the technical term for the small amount of solder on a plated pad. we are getting poor screen printing gasketing on a 20 mil qfp due to this solder not being even or too high in spots and not covering the length of the pads. an
Products, services, training & consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep, Distributor & Service Provider for Seamark/Zhuomao and Shuttle Star BGA Rework Stations.
Training Provider / Manufacturer's Representative / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
1750 Mitchell Ave.
Oroville, CA USA
Phone: (888) 406-2830
