Electronics Forum | Fri Feb 15 07:52:27 EST 2008 | lococost
Dear SMTnetters, I've been told to have a look at finding a machine that could mill the leads of all PTH components to a certain height on an assembeled and soldered PCB. PCBs should be inserted in one side of the machine and come out milled on the
Electronics Forum | Thu Oct 23 12:50:28 EDT 2008 | gregoryyork
Hi Dave sorry not been back the Tin/P regenerator is controlled amounts of Phos additive that metallurgically reduces the dross. We do not recommend chemical methods for dross reduction as many salts/chemicals used could be hygroscopic in nature and
Electronics Forum | Sun Dec 02 16:18:22 EST 2012 | sarason
A few years back when I was working in a Hybrid company we used carriers machined from aircraft grade aluminum. Its easy to machine on a Mill doesn't bend so easy when mishandled.The thing to know is do your flex circuits sit flat when placed on the
Electronics Forum | Tue May 17 03:48:51 EDT 2005 | Base
YV100, easy... YV112 uses a dual work-area, dual gantry machine in which the gantry does X and the PCB-table does Y movements. Also each gantry can only work on one PCB work-area and can pick form only one side of the machine. Basically you have two
Electronics Forum | Fri Oct 23 14:22:44 EDT 1998 | Y.F. Michael Kou
| We currently using the Panasert SMT machine where PCB flow | direction were from right to left, & we are planning to move | in the FUJI -CP3 & CP4-2 in line where standard PCB | flow direction were left to right. | Any comment on FUJI machine modif
Electronics Forum | Thu Nov 27 02:52:33 EST 2003 | Giordano Trecca
I'm using a CIM software (http://www.aiscorp.com/products_npi_circuitcam.htm) to import gerber files and produce pick&place programs and paper/paperless documentation. It's very friendly, useful and fast, but not cheap. I don't know any other softwa
Electronics Forum | Wed Jul 22 05:54:41 EDT 2015 | langkeauto2015
Hi, Tsvetan, sorry for your bad experience for Chinese brand PNP machine. For your doubt, pls refer to my comment:) Our pnp machine is special for led tube, led panel, led strip, RGB strip, and led display screen PCB, and real working speed feedbacke
Electronics Forum | Sat Jan 15 03:30:25 EST 2000 | Dean
I have reduced solder balling by up to 60 percent by changing the placement height on chip parts. Essentially account for the 6 mills of "Z" height to reduce the "squeezing" effects of the chip impacting the solder bricks. Cheap and easy, especial
Electronics Forum | Mon Aug 16 14:43:44 EDT 2010 | dan_ems
Hello, i don't know if is possible to dispense paste but for reduction of cost we use a diferent type of stencils, from aluminium of 0,2 mm, purchased from a typography of newspapers. Ofcourse the pcb for what we use this stencil are simple. But th
Electronics Forum | Thu Aug 31 18:19:27 EDT 2006 | dmascare
I am currently contemplating the purchase of a pcb prototyping machine. The machine will be used to prototype some patch antennas, microwave circuits, embedded systems, boards for various surface mount chips evaluations, possibly milling PZT materia
Products, services, training & consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep, Distributor & Service Provider for Seamark/Zhuomao and Shuttle Star BGA Rework Stations.
Training Provider / Manufacturer's Representative / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
1750 Mitchell Ave.
Oroville, CA USA
Phone: (888) 406-2830
