Electronics Forum | Mon Mar 09 15:53:05 EST 1998 | Tom Foley
| I am looking for component placer that can handle not only smc but also flip chip C4. | If there is any machine satisfying my request, please inform me. | machine name , spec, and so on. Take a close look at the Philips ACM. The ACM is engineere
Electronics Forum | Mon Sep 11 12:03:25 EDT 2017 | emeto
Absolutely - it is probably cheaper! Soon they might start doing it with the transistors, diodes and ICs too. Why would you need a sophisticated AOI machine then? What would quality control look for? It is annoying, considering the amount of differen
Electronics Forum | Fri Apr 16 01:19:10 EDT 1999 | Wiratsr
Hi Jeff, I didn't have experience with Pansert MV2-E, but I have MV2-F. The machine running in high speed, but very noisy. I have other machine Sanyo TCM-3000 Same speed with MV2-F. Sanyo is original design turret system, a stable mounting machine,
Electronics Forum | Thu Oct 27 06:05:50 EDT 2022 | angela t
SMT chip processing short-circuit bad phenomenon mostly in the fine pitch IC pins, mostly in the 0.5mm and the following pitch between the IC pins, because its spacing is small, improperly designed template or printing a slight omission is very easy
Electronics Forum | Thu Oct 27 06:36:33 EDT 2022 | richardcargill
The PCB needs to have a flat finish to the pads too - HASL finished boards don't work well with fine pitched ICs/QFNs etc
Electronics Forum | Fri Apr 30 13:26:10 EDT 2021 | amaliahx
The pandemic has altered people's habits, causing a surge in demand for home electronic devices. This has swept the global chip supply and disrupted automobile manufacturing. The pandemic has led to the global shortage of semiconductors or chips, and
Electronics Forum | Wed Apr 13 05:01:07 EDT 2005 | chandran
where can i find full standard part dimension for chip,ic,bga and others for machine mv2f,msr and msf.If there anybody know about this pls help.
Electronics Forum | Thu Jun 18 20:19:04 EDT 2020 | compit
I have to place the element as in the attachment. The nozzle grabs the quartz, but it is not the center of the module and I cannot recognize it correctly. How to deal with the shift? What do you treat such elements - chip, IC, other?
Electronics Forum | Thu Sep 16 03:53:04 EDT 1999 | park kyung sam
Can you imagine that there is a smt process using the a few chip and ic are nearly about 4,5,6,8 years old. Antigues?? what should you do If you are an engineer of smt process in that company. thank in advance.
Electronics Forum | Sat Mar 27 00:36:54 EST 2004 | Eric
Hi, I'm looking for an equipment to check on all the chip and ic placement pressure. Pls advise where can i find this type of equipment. Thanks.
winsouce.jpg)