Electronics Forum | Thu Sep 08 18:01:22 EDT 2011 | comatose
We had a camera die on one of our GSMs. I got a new camera, and it is working, but I need to either find a cal kit to rent for a day, or else if someone knows a reasonably accurate procedure to calibrate the new camera using the other upward looking
Electronics Forum | Mon Sep 02 15:20:48 EDT 2013 | aemery
Interesting! not the usual error. In my experience when the vision cables get damaged it shows up and white noise flashes across the monitor. The connections are the easiest to check so here's your system layout with connection points. Starting at
Electronics Forum | Thu Mar 14 19:08:56 EST 2002 | stevezeva
Hi ya'll! I know this is going to be an extreme longshot, but I'm in desperate need of a Assemblion Emerald 54mm front light camera mirror (part number 5322-380-10285). Ours got cracked somehow (still haven't found out how, probably never will...
Electronics Forum | Tue Oct 31 23:46:12 EST 2006 | fastek
Which nozzles are coming up NG on the large camera? If it's the smaller ones, don't worry about it. Those nozzles don't use the large camera anyways. Be concerned if the small nozzles are coming out NG on the small camera.
Electronics Forum | Thu Jun 23 18:21:36 EDT 2005 | cmiller
Does the board appear to be in the right possition on the conveyor when the camera comes to look at it?
Electronics Forum | Wed Aug 23 16:37:07 EDT 2006 | flipit
If you bought this camera from Universal, it should come focused correctly. I had one of the first 0.5 mil cameras for flip chips. I used it for years and it was out of focus. I finally convinced Universal that something was wrong and they replace
Electronics Forum | Thu Jan 04 11:07:59 EST 2018 | ilavu
Ray, Did you solve this problem? I am having same error on same model machine. My problem is, when camera axis moves to look at the first fiducial, camera hits to the cleaner and error comes up with rising table error, camera axis not home. Even log
Electronics Forum | Fri Aug 16 15:47:56 EDT 2013 | larrygroves
Hi, I know it's confusing. The 421 is sold with two different vision cameras, standard and megapixel. It depends where you buy the machine. North american machines come with the megapixel cameras standard and will just need a Cn020 nozzle and app
Electronics Forum | Tue Nov 22 19:54:45 EST 2022 | davef
Every year, for the holidays, grannies come to the camera store to get their point & shoot cameras fixed. They've replaced the battery, but it still won't work. In the past, we used the eraser on the end of a No.2 pencil to buff the corrosion from th
Electronics Forum | Tue Mar 17 11:13:26 EDT 2009 | tegel
Hi, Now it was a couple of years since I did this but it's possible. I have been down to 0.5 mm pitch. If you have a vision system with vision type 230 I would suggest that you use that. One other trick is to only specify 50 % of the ball diameter.
