Electronics Forum | Tue Aug 02 15:03:37 EDT 2016 | davef
On a previous black pad experience we soldered a wire to a fiducial and did a pull test to failure. On the black pad board the wire and solder pulled of clean leaving the fiducial on the board. On good boards the copper came off with the wire. If you
Electronics Forum | Wed Jan 03 14:19:12 EST 2007 | muse
Have you checked out Alpha Wire Co. FIT-Print tubing? http://www.alphawire.com/pages/141.cfm I don't know if this is what you are looking for or not.
Electronics Forum | Tue Dec 15 06:07:53 EST 2009 | joelinacio
I need to know what is the sot-23-5 in the dmm fluke 189 with the code t6g. It is wired with the com conector.
Electronics Forum | Mon Feb 27 06:42:37 EST 2006 | Slaine
What are the long term issues with high tin content solders on parts plated with silver over copper? Is it possible that the silver will be absorbed by the solder then over a long period of time the tin will react with the copper causing it to part
Electronics Forum | Fri Nov 17 07:58:06 EST 2006 | markb
SWAG - I also forgot to mention a few things. Our delmaination was always between the large copper plane and the laminate. It is a multi-layered board, so even when the delamination appeared around components (through visual inspection), cross-sect
Electronics Forum | Thu Dec 21 10:20:44 EST 2006 | Mike F
I realize this is not a board assembly question, but I'm hoping some of the people that read this forum can offer some suggestions for me to evaluate. I need a way to mark wire numbers on shrink sleeving that does not have the name Brady anywhere i
Electronics Forum | Wed Jan 31 17:30:54 EST 2007 | GS
Thanks a lot flipit, I am not directly involved in this "problem" but is my friend that have his CM rejecting PCBs because it says the "+" mark (spokes lengths) are out of tolerances. It seams CM bonder's require tolerance +/- 0,05(? not sure). I d
Electronics Forum | Thu May 01 23:46:55 EDT 2008 | lellis
Revealing trade secrets to achieve what a company can do to make money is a "touchy" situation. Especially on a forum where people are asking for help. Our company has the capability to remove your markings, and reapply them in several techniques.
Electronics Forum | Thu May 08 17:26:06 EDT 2008 | rogercox
Are there recommended image reject marks in order to process x-outs from a PCB supplier? Do they have to be in the copper or will silkscreen suffice?
Electronics Forum | Mon Nov 01 04:40:29 EDT 2010 | jacki
Hi Mark thanks and useful. However, I couldn't find the Copper base solder paste which melting point is lower than 210'C.