Electronics Forum | Thu Mar 02 20:33:31 EST 2023 | oxygensmd
There is a worning parts inside the coupler, if worn the coupler miss the accuracy. Second one is the offset mechnic which also can miss the accuracy. Offset mechanic is under the plate (next the operator door). Check it by hand to be stable and be m
Electronics Forum | Tue Feb 28 22:45:09 EST 2023 | kumarb
Thanks guys. Chatted with Ekra (Irv / Rudi) and we have nailed it down to the table LEFT side motor and it is specifically the coupler. As I turn the coupler by hand, there is some internal component under the coiled spring that makes a snapping soun
Electronics Forum | Thu Mar 02 20:06:51 EST 2023 | kumarb
Thanks for your comments. The table aligns fine but just makes the whining / ticking sound when using the 'REFERENCE' command. In this command the table moves more than the live 'AUTOMATIC' mode. The motors are working fine to align the PCB & stenci
Electronics Forum | Sun Apr 18 00:07:23 EDT 1999 | Vic Lau
I have experienced some dewetting problem on the photo-coupler's lead. No matter what types (how strong) the pre-cleaner and fluxes I used, still not completely resolve this problem. I just wonder, why this is so common to have dewetting problem on
Electronics Forum | Fri Mar 17 14:59:50 EDT 2023 | proceng1
OK, does your axis screw have the flex coupler or the magnetic coupler? Which axis is it? Did you turn off soft limits? If it's out of range, soft limits won't let it move by controls. I need to know which axis before I can get too far into this. I
Electronics Forum | Thu Aug 23 11:34:03 EDT 2012 | ericrr
With the help of the photo what would the little 90°coupler that joins the little (in diameter) hose to the solenoid that makes the squeegee go forwards and backwards. This is ex-second hand screen printer (SD-04-00) from Kontakt-Systems Ltd
Electronics Forum | Fri Mar 17 09:03:52 EDT 2017 | daleb
Hello New to forum, I have a mpm ultra print 1500 can not find a lube coupler for the Z axis slide bearings. Does anyone know what it is and where could I find one. A standard grease coupling does not fit. Thanks Dale
Electronics Forum | Wed Jun 15 19:46:15 EDT 2022 | mikevb
Hey All. I figured it out. It turns out that the problem was simply a loose coupler on the x wagon motor transducer. I had only checked one screw in the past but the other screw was apparently loose as well.
Electronics Forum | Mon Oct 05 10:29:38 EDT 2009 | cyber_wolf
I ended up finding that there were broken chords on the X-belt. I replaced it and all is good. Rob, Mydata is right. You can indeed end up spending lots of time and money trying to chase a transducer error. Things I would look at: 1. Lubing the X b
Electronics Forum | Tue Jan 04 15:33:05 EST 2005 | davef
We seemed to replace a lot of optical couplers and absolutely hated that the calibration instuctions in the manual were not translated from German. [Got politely escorted from the Novastar Booth at a trade show for complaining to the company preside
