Electronics Forum | Sun Dec 20 12:42:57 EST 2015 | dilogic
We have DEK248 and Ultraprint100 printers. Ultraprint100 has custom video hardware while DEK has PC-based vision,which I prefer. Both perform roughly the same, and each has some design advantages over the other. We do routinely print 0.5mm pitch TQF
Electronics Forum | Tue Jul 30 23:54:54 EDT 2019 | rob1
Is possible to view and edit PR1 files from a DEK 265 Horizon on a PC?
Electronics Forum | Wed May 25 12:09:52 EDT 2022 | stevemiles
Hi, I've had this problem with two DEK Horizon 03i printers. The first time it was the camera (firewire) causing the PC to freeze. The second time it was the firewire card in the PC that was the problem. Try moving the camera firewire cable to a d
Electronics Forum | Thu Aug 23 09:44:09 EDT 2018 | midware
Hi. Please help. On DEK 265 GSX i've got on the monitor message: "DEK 265 GSX Motor comms failure, card 1, axis 123 fatal error." F1-F8 doesn't work, machine cant start. No result after Reinitialise machine. Which one is this card1? Is it in PC?
Electronics Forum | Tue Mar 07 19:47:59 EST 2017 | jswatt
So looks like we have it locked down to the dongle failing, we have tried to read it in other PC's with Deskey's software and nothing. the PC's can see the dongle in the device manager but get nothing else. I don't believe we have a back up for this
Electronics Forum | Wed Aug 24 09:20:25 EDT 2016 | dekhead
Suspect comms link error from Y3 to Y1 crate. COM 2 off of CPU, depending on board. If CPU board has RS485 port it is direct to back panel of PC; if older board it only has RS232 and thus requires 232/485 converter board (internal to PC). then direct
Electronics Forum | Thu Sep 01 08:30:54 EDT 2016 | bukas
Certainly possible CPU board issue; but check PC > power supply, that all DCV are present and > strong. > > www.dekhead.com > Certainly possible CPU board issue; but check PC > power supply, that all DCV are present and > strong. > > http:/
Electronics Forum | Tue Sep 11 12:36:29 EDT 2007 | chrisgriffin
Sounds like the Cognex vision processor in the PC is bad. There is really nothing you can do but buy a new one. These typically run between 5k to 9k. Good luck
Electronics Forum | Wed Apr 11 19:53:28 EDT 2012 | dekhead
I believe the gentleman in India found a problem with one of the EuroSystem cards; AND then an issue with a corrupted PC MINT on the HDD... Seemingly resolved.
Electronics Forum | Fri Sep 28 21:30:35 EDT 2012 | dekhead
Assuming you are not seeing 240VAC @ PSU inputs. Present @ transformer, but not much beyond CB1 on Y4... Nothing to PSU's or PC, etc. Inrush suppressor(s) (Thermistors). Contact me directly. www.dekhead.com
