Electronics Forum | Fri Jun 18 17:38:25 EDT 2021 | clabra
!!!Does anyone know where i can get a parts catalog or spare parts for a Ekra Screen Printer specifically a bottle that i would fill with solution to clean the stencils the bottle is located on the back of the printer!!!!
Electronics Forum | Fri Jan 03 00:22:02 EST 2003 | Steve
We have an Ekra E5 that uses what looks like standard auto valve stems to dispense the cleaning fluid. They leak.. Are they just standard schrader valves or are special to withstand the chemistry of stencil cleaner?
Electronics Forum | Tue Jun 13 16:53:35 EDT 2017 | sean87
For many moons, I have used IPA for our cleaning > tanks within out DEK systems. Now we have a new > engineering team and he would like to try a > stencil cleaning solution (DEK PRO XF). Can > everyone tell me there pros and cons of using > each
Electronics Forum | Wed Jul 04 03:59:10 EDT 2018 | oxygensmd
I had similar problem before. I cleaned the PCs (both machine and station) and replaced the cooling paste on the CPU cooler. After time the Control was able to shut off - before the issue solved, we used the safety knob to cut the Control.
Electronics Forum | Wed Jul 04 04:04:19 EDT 2018 | oxygensmd
One more thing. We had a card defect during the control had this problem, on of TBF card burned out. But I think you need to check the thermal paste in the PC - clean the cooler and the filter first.
Electronics Forum | Mon Feb 23 12:22:32 EST 2004 | esoderberg
I have an MPM SPM and two Ekra E4 screen printers. I have always run them dry with vacuum. I am also using no-clean paste and have not had a problem. The volume I run per day on the machines is 4 - 6,000 bds
Electronics Forum | Thu Jun 09 07:02:02 EDT 2005 | ajaydoshi
1. We do have PCB with 0402 component, Micro BGA ( 0.5mm pitch , 0.25 mm pad size ). PCB thickness is 0.8mm. What stencil thickness we should use. PCB size 40 mm X 60 mm 2. We have EKRA E4 , What will be optimum setting for above. Pressure, Scquge s
Electronics Forum | Mon Aug 29 08:07:36 EDT 2022 | thegreatresisthor
Good morning everybody Our PCB's keep on getting stuck on their way from the Printer to the SPI. That happens like between every 20 to 30 minutes. We've checked the conveyor with, the cleaning cycle and also the transport acceleration speed but none
Electronics Forum | Wed Sep 06 11:08:09 EDT 2006 | Shep
I'm using an EKRA X5 printer. My QC department has been rejecting boards for "fibers" in solder joints. After investigation, I have determined that the fibers are coming from the stencil cleaner paper. I'm using JNJ Industries p/n 5404EK paper. A
Electronics Forum | Sun Mar 22 09:10:54 EDT 2020 | kumarb
Hi Steve. Just came across your post. We are in the same boat with our Ekra X4 printer. Any resolution on your side? We have been attempting to track down a fresh ballast but the original (OSRAM HF 2x36 dimmable with 0-10V) is EOL and no where to be
