Electronics Forum | Tue Jul 13 05:21:04 EDT 2010 | bubbobbed
Guys, I've received complaints from customer that the chip is sticking on the cover tape or carrier tape when detape. Is there any possible that i can solve the problem by changing the cover tape or carrier tape?? some say the root cause of this issu
Electronics Forum | Tue Jul 13 14:25:09 EDT 2010 | davef
While you're waiting for others to reply, here's link to a recent thread that seems similar to yours: http://www.smtnet.com/Forums/index.cfm?fuseaction=view_thread&CFApp=1&Thread_ID=14787&mc=13
Electronics Forum | Fri May 20 09:50:10 EDT 2011 | blnorman
Have you checked for ESD?
Electronics Forum | Thu Jul 19 18:15:15 EDT 2012 | jil2000
We have a material that is been stick at cover tape, only 1 supplier is failing and only embossed tape packing is failing. A dark spots between tape and component are observed, we already bake material to se if is humidity, is not. We already apply
Electronics Forum | Wed Apr 19 06:56:54 EDT 2006 | QTEK Manufacturing Ltd. www.qtek.com
QTEK Manufacturing Ltd. provide a solution to the above problem, QTEK Cover Tape Extender adds an extra 380mm to cover the tape of component reels. It saves components being wasted or discard when strating a new tape through a feeder, and enables the
Electronics Forum | Tue May 09 18:41:54 EDT 2006 | SMT_CNC
It is a very simple practice to leave a leader when breaking down a setup. This way the next time you're going to use the reel there is about a foot of cover tape to use. Seems to work in our SMT production area. Max.
Electronics Forum | Thu Mar 30 13:15:31 EST 2006 | jdengler
This will depend on the feeder design. Some feeders cause a loss of several components when removing a reel from a feeder. If yours do not, the operator should be able to leave enough tape and mylar cover tape for this reel to be put back onto a fe
Electronics Forum | Fri Mar 31 16:06:58 EST 2006 | GS
I think this can be of help when dialing with setting up feeders for product prototyping, where often we have to dial with a short quantity of components (often pieces of carrier tape w/o tape and cover leader) just enough to run (if lucky) those few
Electronics Forum | Thu Mar 30 13:15:17 EST 2006 | gregp
Maybe the issue is how the feeders are being unloaded. The operators should leave enough covertape to reload the reel onto a feeder without component waste. If the issue is some parts are exposed in the feeder then you will most likely loose those p
Electronics Forum | Thu Mar 30 13:09:08 EST 2006 | bvdb
The cover tape that seals the parts into the reels on our feeders always uncovers a few parts (up to ten 0805 parts) before the part can be picked. So removing a partial reel always results in the loss of a few parts. Putting a partial reel back on
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411
.gif)
