Electronics Forum | Wed Jan 07 00:18:14 EST 2009 | milanrit
Recently on one of my assemblies(sn/pb) I started seeing leaded BGA failure at functinal test for opens, but when I inspected them through 5DX and ERSA Scope it doesnt seem like there is any opens or insufficient and half no. of boards passed functio
Electronics Forum | Sat Apr 16 13:43:53 EDT 2005 | KEN
What about electo migration? I had (what apears to be) the exact same problem you describe. X-ray and ICT fails to detect micro shorts. However, in our test, the bench functional test would show a current overload. In some cases the electro migrti
Electronics Forum | Tue Feb 13 14:33:16 EST 2007 | CK the Flip
So the moral of the story is..... these SAC305 BGA's were accidentally mixed in with a Leaded process, the profile couldn't get hot enough due to Tg and Td constraints on a known good QFP on the same board, and consequently, the whole assembly fail
Electronics Forum | Thu Aug 03 12:51:20 EDT 2006 | Ofer Cohen
I'd appreciate your support in the following issue: A significant batch of PCBs failed on de-lamination. The failure was identified, of course, only after the assembly. There is a big variety of components (BGA 1mm, BGA 0.8 mm, FQPs and other SMT co
Electronics Forum | Thu Aug 03 12:51:59 EDT 2006 | Ofer Cohen
I'd appreciate advise in the following issue: A significant batch of PCBs failed on de-lamination. The failure was identified, of course, only after the assembly. There is a big variety of components (BGA 1mm, BGA 0.8 mm, FQPs and other SMT componen
Electronics Forum | Tue Mar 13 16:05:30 EST 2001 | rob_thomas
Hi, can you definitely attribute the 30%yield to poor bga soldering? What is your high flyer defect encountered on the failed boards.Is this ICT ,flying probe ,functional test yield? Can you determine a defect pattern? Did your subcontractor provided
Electronics Forum | Fri Aug 20 12:41:20 EDT 1999 | stefano bolleri
| | Yesterday as I was creating a profile on a plastic BGA using Conceptronics freedom 2000 rework station, I happend to discover that I was able to remove solder bridging from a plastic BGA. | | | | This is what I did. | | | | Created a removal pr
Electronics Forum | Fri Aug 20 14:51:47 EDT 1999 | Tony
| | | Yesterday as I was creating a profile on a plastic BGA using Conceptronics freedom 2000 rework station, I happend to discover that I was able to remove solder bridging from a plastic BGA. | | | | | | This is what I did. | | | | | | Created a
Electronics Forum | Fri Aug 20 17:17:14 EDT 1999 | K.T
| | | | Yesterday as I was creating a profile on a plastic BGA using Conceptronics freedom 2000 rework station, I happend to discover that I was able to remove solder bridging from a plastic BGA. | | | | | | | | This is what I did. | | | | | | | |
Electronics Forum | Fri Aug 20 14:51:55 EDT 1999 | Tony
| | | Yesterday as I was creating a profile on a plastic BGA using Conceptronics freedom 2000 rework station, I happend to discover that I was able to remove solder bridging from a plastic BGA. | | | | | | This is what I did. | | | | | | Created a
