Electronics Forum | Tue Jun 25 13:17:01 EDT 2019 | dman97
See attached PDF of all wiring options.
Electronics Forum | Tue Jun 25 09:48:56 EDT 2019 | andrewpayonk
I remember seeing a diagram, it actually only uses like 3 wires
Electronics Forum | Wed Jul 17 09:25:54 EDT 2019 | andrewpayonk
When you transmit, I think the machine has to be set to 'offline'
Electronics Forum | Fri Jul 19 07:37:22 EDT 2019 | BigFuji642
Anyone got some ideas of what my issue could be?
Electronics Forum | Fri Jul 19 11:11:38 EDT 2019 | dman97
Have you imported the proper data into flexa yet?
Electronics Forum | Fri Jul 19 11:02:15 EDT 2019 | dman97
You never answered my question on the proper data. Do you have a hard copy of the proper data? Is the diskette (if you have it) in Fuji Flexa format? In order for flexa to communicate with the CP6, you must have the correct proper data.
Electronics Forum | Tue Jul 02 10:37:36 EDT 2019 | dman97
I also forgot to add that if the proper data was not generated by flexa for the CP6, then flexa will not communicate with the machine. You need to flush the proper and resend using flexa for the communications to work correcty. Good luck!
Electronics Forum | Fri Jul 19 11:16:21 EDT 2019 | dman97
And yes if the proper data is not correct it will give you a error message because Flexa cannot communicate with the CP6.
Electronics Forum | Tue Jul 02 10:34:48 EDT 2019 | dman97
You should be using the diagram on page 4. 9pin to 25 pin. Flexa settings should be set to NT C/C. You have to make sure that the COM settings in windows are set correctly for the USB adapter you are using. Whatever COM port windows assigns to the US
Electronics Forum | Tue Jul 02 11:04:20 EDT 2019 | dman97
The pin outs are not mirrored. The proper data files usually come on a disk and are usually inside one of the cabinets on the machine. Chances are that the proper data disk is MCS formatted. In order to extract the proper data from the disk you woul
