Electronics Forum | Mon Jul 11 07:15:09 EDT 2022 | sophyluo1985
https://www.goldlandsmt.com/original-fuji-nozzle-vs-copy-fuji-nozzle/ If you have a better proposal, we can discuss it. please contact me, thanks
Electronics Forum | Mon May 04 22:42:46 EDT 1998 | Phillipf Hunter
Okay, Fuji MTU4 experts...I need a precise way to determin the X-origin and Y-origin of the tray plates. The center of the S-nozzle referenced to the plate corner is very difficult to EXACTLY measure. I need accuracy to pick small QFP28's - otherwi
Electronics Forum | Sun Mar 15 23:48:59 EST 1998 | Phill Hunter
| | | Has anyone had any success in repairing Fuji CP nozzles in house? Removing bent press fitted nozzle and replacing. Any input would be appreciated, please no solicitation from repair shops | | Rob, | | What model of CP? | Mr. Kooki | CP4 and 6
Electronics Forum | Tue Jan 30 12:21:49 EST 2007 | cyber_wolf
Rob, I have talked about this on the forums before. I have since then gained much more experience on this issue. Some things to look at : 1. The X/Y/Z table must be indicated flat. (See the Fuji manual for specs.) 2. Your Z-origin must be correct.
Electronics Forum | Thu Jun 11 06:57:22 EDT 2015 | cyber_wolf
Linux, The amount of error that you are describing is about the thickness of a human hair. Unless you are placing 0201's I can't understand why .12 is an issue. There are many factors that can effect placement accuracy on a CP6 For instance: 1. M
Electronics Forum | Tue Jul 02 10:22:17 EDT 2002 | gwaco
Thanks brian, we do use "shape origin". Yet the connectors need constant tweaking. There is no slippage from the nozzle either. So what you are saying its possible that the designers may be using unicam center and we are using shape center? Is it pos
Electronics Forum | Fri Apr 16 17:44:40 EDT 2010 | rodrigo
We're still trying to fix a C-axis overflow error in our CP-65. I was swapping servo boards and one of them started to blinks a 2 on the LED single digit display and the machine didn't boot up. I replaced the servo board with a spare we bought on eba
Electronics Forum | Wed Feb 01 00:10:32 EST 2006 | kent
Are you seeing this problem with the nozzles after an error stop? Well check station 15 confirm nozzle clutch origin. It will cause this problem. If you rotate a shaft (with the machine stopped) 45 degrees and start you will get return theta off and
Electronics Forum | Thu Oct 04 00:05:25 EDT 2018 | gaintstar
Flason SMT chip mounter Reflow Ovens: http://www.flason-smt.com/product/PCB-assembly-line-equipment-SMT-spare-parts-Dek-Motor-188962.html http://www.flason-smt.com/product/PCB-Conveyor-for-LED-Production-Line-SMT-Assembly-Line.html http://www.flason-
Electronics Forum | Thu Apr 30 17:03:45 EDT 1998 | Ray N. Lopez Mata
| | | | | | | Hello - | | | | I am interested in obtaining information on the possibility of integrating a Vision Inspection System with an SMT line. I am aware of systems which may be used to gather placement data and such, but are there any system
| 1 |
