Electronics Forum | Fri Mar 16 08:42:25 EDT 2007 | AR
Of course, if the number of required component codes ( = feeders) is not very great, you might want to look into odd-form assembly machines. With them you can insert a much greater range of components than just simple radial components and you can ge
Electronics Forum | Fri Apr 06 11:37:19 EDT 2001 | raton
We had the same problem years ago when we started using a radial inserter. The inserter would dutyfully insert and clinch the leads. The problem in our case was the component body sealing to the fab, especially on electrolytics caps with a film jac
Electronics Forum | Wed Nov 12 11:32:36 EST 2003 | lloyd
Depending on quantities etc, you probably have a few options. If it's the automated route you require then any of the radial insertion machines from UIC or TDK will do the job. We've inserted LED's in the past with machines over 10 years old, so if
Electronics Forum | Fri Jul 11 00:31:31 EDT 2003 | swuicsup
Marcel, Reconfiguring your machine from 80 to 20 stations is quite easy. In the sequencer portion of your machine, it has it's own I/O box. in it, there's the MIT card, location (1). The bit switches are there to inform the controller in the in
Electronics Forum | Thu Oct 28 11:50:35 EDT 1999 | Dave F
Eric: Royonix 661-257-0303 http://www.royonix.com/umg.html seems to be the US distributer for UMG Technologies' High Speed Axial Thru-Hole Inserter Systems Ta Dave F
Electronics Forum | Wed Jan 18 17:32:10 EST 2017 | b_harte
Hi James,(Apologies for the long post) If you are still having this problem there is a solution that you can try. If on a paper carrier the black support / insert can be modified. the insertion of a cylinder magnet can hold the component down at "fas
Electronics Forum | Tue Apr 11 13:01:36 EDT 2017 | mrich208
Yes Sir, someone had replaced the fuse with a resistor and it had burned up. We had an exact board on the VCD. We swapped them and it worked! I am not sure how this forum works but now the machine will zero and say it's missing a part but the sequ
Electronics Forum | Tue Jul 13 14:36:55 EDT 1999 | JohnW
| I am examining cut & form PTH component prep equipment to help in our manual PTH insertion process. We need the ability to process both axial & radial with snap-in and stand-off capability. Low volume with the ability to feed bulk, T&R, or Stick. |
Electronics Forum | Thu Jul 02 15:05:47 EDT 1998 | Tom Isaacs
| Help!! Sorry, I missed the insert portion before. Contact me, I have a high-speed system capable of measuring a 12" x 12" pcb, all pads, in under 20 seconds. | There has to be someone out there other than Cyberoptics. Not that I think they don't h
Electronics Forum | Fri Jul 03 18:46:16 EDT 1998 | Jon
Yes, but at what price for the 'fast ' system???? | | | Help!! | Sorry, I missed the insert portion before. Contact me, I have a high-speed system capable of measuring a 12" x 12" pcb, all pads, in under 20 seconds. | | There has to be someone out t
winsouce.jpg)
