Electronics Forum | Thu Jan 10 07:52:19 EST 2008 | stano
Hello everybody. We have ERSA Hotflow 7 oven, and we want run weekly timer. We had setting it, but oven still run, it does not turn off and on automatically, and message is : clock is bridged. Know somebody how to set weekly timer? Thanks.
Electronics Forum | Wed Oct 11 23:36:05 EDT 2006 | stano
Hi all. We have problem with ERSA Hotflow7 oven. If PCB go by oven temperature in first zone descend down approx. 15�C. Can anybody help me. Thanks.
Electronics Forum | Wed May 07 16:56:20 EDT 2008 | fujillews
hi send me your contact info to llew@alternativesmt.com and i will sort you out by return
Electronics Forum | Mon Oct 16 05:31:43 EDT 2006 | vasily
Hi Stano You put "cold" PCB into the oven. What do you expect? Of course the temperature will go down. I don't think it affects the final result of soldering.
Electronics Forum | Thu Jan 29 20:57:06 EST 2009 | padawanlinuxero
HI!!! its a ERSA Reflow Oven HotFLOW 7 and I really appreciate some help thanks
Electronics Forum | Thu Apr 24 13:36:06 EDT 2008 | georgegaytan
Can somebody help me? I have an Ersa Flow 7 but the hard drive from the PC is completely damage. I need a copy of the software in order to get my machine running but I do not want to pay Ersa for all kinds of fees to get a copy. I do not mind paying
Electronics Forum | Thu Apr 24 14:07:49 EDT 2008 | slthomas
Don't know that oven or if the layout is similar at all to a Heller, but in our 1500s you could lose a blower and not get an alarm until a large board blocked vertical airflow. At that point the thermocouple in the faulty zone would then lose heat
Electronics Forum | Sat May 26 04:57:53 EDT 2001 | Brian Sloth Bentzen
Dear Frang. The right O2 level are mostly determined by the products you produce (E.i. PCB surface and component solderability). In reflow I would say the window is between 100 and 1000 ppm, depending on the issues above. Personal I choose a maximu
Electronics Forum | Mon Oct 16 10:07:11 EDT 2006 | realchunks
Wow, 15 degrees C is too much. Is this a new problem or new oven? If it's a new problem several things you can check out. Thermocouple placement may have got knocked into the wrong spot, or it could be dirty. I've seen this happen after a PM and
Electronics Forum | Fri Jan 30 06:28:42 EST 2009 | gregoryyork
Hi Armando Hotflow 7 is a big machine and one of the best Reflow ovens around (in my opinion), well suited for Lead Free. A typical 1.6mm board has the following settings for Lead Free SAC305 paste All Temperature settings are Top and Bottom Prehea
winsouce.jpg)
