Electronics Forum | Tue Sep 28 08:27:55 EDT 1999 | Earl Moon
| if anyone has used or has one of these bga rework stations please give me your opinion on them. I am planning on using the sytem for not only rework but also low volume prototype production for hand built 1 or 2 qty pcb's, so ease of use is impor
Electronics Forum | Sat Sep 04 09:31:35 EDT 1999 | Earl Moon
| | | Dear sirs, | | | | | | If you have experienced Proflow of DEK screen printer, please let me know the details of it. | | | | | | Best regards, | | | | | | Jame Bond | | | | | | | | James, | | | | Stir, don't shake is not good advice for c
Electronics Forum | Tue May 26 14:42:55 EDT 1998 | Justin Medernach
| We currently bake plastic SMT parts in accordance with the IPC guidelines for moisture sensitive parts. Because we have double-sided boards that are subjected to either an aqueous or semi-aqueous cleaning process, we do a 24 hour bake at 125 deg.
Electronics Forum | Mon Dec 28 12:36:31 EST 1998 | Mark D.
We have a Vitronics SMR400N oven and many times need to use N2 inerting. My problem is that it takes close to an hour of operation to purge the system to achieve the desired O2 levels (~40PPM). This is not only time consuming but results in an inordi
Electronics Forum | Tue May 26 15:49:05 EDT 1998 | Earl Moon
| | We currently bake plastic SMT parts in accordance with the IPC guidelines for moisture sensitive parts. Because we have double-sided boards that are subjected to either an aqueous or semi-aqueous cleaning process, we do a 24 hour bake at 125 deg
Electronics Forum | Mon Jan 04 18:56:25 EST 1999 | Marc P.
| We have a Vitronics SMR400N oven and many times need to use N2 inerting. My problem is that it takes close to an hour of operation to purge the system to achieve the desired O2 levels (~40PPM). This is not only time consuming but results in an inor
Electronics Forum | Fri Apr 02 02:01:24 EST 1999 | P.L. Sorenson - Technical Consultant
| | | Has anyone heard of a problem with catastrophic failure of | | | large value (200uF) solid tantulum capacitors that have been | | | exsposed to high humdity. | | | | | I suppose that with water moisture seep in the capacitor, the risk is ver
Electronics Forum | Mon Oct 31 20:35:58 EST 2005 | milroyperera
If I brief shifting, I checked the component before it enter the reflow oven and saw that the IC is perfectly aligned on the pads but when it comes out from the oven the IC is floated on the pads. The floating is irregular and the IC is shifted away
Electronics Forum | Fri Sep 26 16:49:46 EDT 2008 | janz
what about tube (could be transparent) with opening at the bottom to pick up by operator and loading new fresh jars from top (vertical tower of solder jars). Each time when operator takes jar next one appears on the bottom etc.
Electronics Forum | Wed Oct 09 13:52:17 EDT 2019 | valletta
Hi Aurther, Thanks for a prompt reply. I agree but unfortunately our AOI is 2D and misses a lot of solder defects especially on connector terminals which are surface mount. We are also dependent on operator at AOI to mark the defect if caught by AOI