Electronics Forum | Wed Oct 06 09:40:49 EDT 1999 | Mark Quealy
I have an adhesive dispenser in my workcenter but I rarely use it. I've replaced this process with wavesolder pallets for bottom side PTH soldering, ocassionally gluing parts left exposed by the pallet. So I was thinking of selling the dispensing equ
Electronics Forum | Thu May 09 12:29:59 EDT 2002 | dougt
So after barcoding takes place, is this info sent to the feeder or the outside world (is the feeder just a number that the pick and place machine looks for or does the feeder tell the machine what it has)? I guess if every machine and remote feeder f
Electronics Forum | Mon May 13 10:16:53 EDT 2002 | pjc
After bar-coding or manual data entry the data is in the Mydata database. The data is not stored in the feeder but in the database. The database links the component data to a serialized feeder and to a PCB s/n or production batch code. The machine so
Electronics Forum | Thu Sep 16 21:46:16 EDT 2004 | jeremyt
I work for a major OEM as well, and we have close to 1000 stencils in house. We just recently went to a new way of labeling our stencils. We ordered metal ID tags out of McMaster, and assigned a Number to each stencil. We then attached each tag to t
Electronics Forum | Tue Apr 01 08:28:19 EDT 2008 | cyber_wolf
DANGER WILL ROBINSON ! DANGER ! If your operators are not real careful the OEM support pins can get under the table frame and bend it. I have seen this happen more times than I would like to discuss. CP's must have the following: 1. Proper part hei
Electronics Forum | Mon May 21 10:25:16 EDT 2012 | swag
Ask for board fiducials if you're running arrays. Global fids on the panel do not work well. One handy product we use on flex is "Tacsil". Works well on SMT pallets as well as router operation. It's double sticky stuff that helps hold on to the P
Electronics Forum | Thu Sep 02 05:19:24 EDT 1999 | JAX
| | I'm in univerity research on SMT assembly systems. Especialy Simulation and Optimisation using OR-Methods. We developed flexible simulation models of various assembly-machines and use them for performance estimation (Components per hour) under di
Electronics Forum | Tue Jun 24 13:46:21 EDT 2008 | bschreiber
I know it is not what you want to hear, but first and foremost, you must consult your local regulating agencies and here is why: Solder paste contains heavy metals. We are all familiar with the problems associated with lead, but lead free solder pas
Electronics Forum | Mon Oct 11 13:53:45 EDT 1999 | Dave F
| In a cost-reduction effort, our Design group is attempting to eliminate silk-screen (legend ink) on some new products. By the elimination of this process, there will be a slight decrease in the cost of the bare board. | | Presently, the silk scre
Electronics Forum | Sat Jun 12 19:08:11 EDT 2004 | Ken
Well, it finally happened. A machine Operator did not follow our bar code process and "grabbed a tube of solder paste" and guess what. Built 250 assemblies with LF paste when it should have been Tin/Lead!!!! SOLDER PASTE SUPPLIERS: can you make t