Electronics Forum | Fri Jul 20 13:57:25 EDT 2007 | fastek
Invest in some training.
Electronics Forum | Wed Jun 30 15:02:17 EDT 2004 | shk5678
Dear Michael Usually the equipment you need is: Universal Instruments 6772 Multi Mod IC Inserter. Universal Axial Inserter either a combination unit or 2 stand alone units one that sequences the parts and one that inserts them. Universal Instrume
Electronics Forum | Thu Jul 19 14:03:53 EDT 2007 | slthomas
Radial Leads (I've had IIs, IIIs, and Vs) do the job nicely, but they need weekly maintenance to keep them running. I don't know if you can get parts for them or not if you're not registered with UIC, but you WILL need parts for it. You will need al
Electronics Forum | Thu Jul 19 11:15:29 EDT 2007 | gmoritz
We just obtained a Radial 5 Inserter with no documentation on how to run the software or to operate the machine. All I have is some hastily handwritten notes from the limited instructions that the installer gave me. Does anyone know anyone who has
Electronics Forum | Tue Mar 13 07:56:19 EDT 2007 | Cmiller
Since you got no reply, I will give it my best shot but we do not have a radial inserter because they are really expensive. I would start with Universal instruments. I think its http://www.uic.com. I think they still make them in New York. TDK and Pa
Electronics Forum | Tue Jul 24 11:28:35 EDT 2007 | vikkaraja
I have to agree with Fastek on the issue of having someone with enough experience or with proper training. Having knowledge and being flexible about tweaking the machine to make it work thats all you really need. We used to call it black magic. I use
Electronics Forum | Fri Jul 27 15:08:07 EDT 2007 | jeffharley
If you have'nt had the pleasure of working on these machines, plan on spending a few weeks in Binghamton to get the basics, this will just get you started. I've worked on these machines for more than 20 years and am presently training two of my guys
Electronics Forum | Tue Jul 31 08:29:11 EDT 2007 | stepheniii
If you can, put a pressure tank near the machine. It will help stabalize the air pressure, but only if the compressor is providing enough air in the first place. Throughhole PNP machines tend to take air in big gulps making the pressure go up and dow
Electronics Forum | Fri Aug 03 12:11:56 EDT 2007 | gmoritz
Any experience with the encoders and ball screws that drive the stage? We are seeing a pretty large y-drift from the 'top' to the 'bottom' of the board during x-travel. I've tried to measure this using the teach function and the x-drift from the sm
Electronics Forum | Mon Aug 13 14:11:14 EDT 2007 | jeffharley
Slot 11 in the I/O box is the one for B.E.C. pcb, the offset is 2125 in the x and 500 in the y axis. The template for the B.E.C. is triangle in shape and is the length from corner to corner on the rotary table. You can also type in sh sys and look to
.gif)
