Electronics Forum | Fri Mar 19 09:48:02 EST 2004 | Patticake
I have a similar question. What are the major differences between J-std-001 and IPC 610 class 3 ?
Electronics Forum | Fri Mar 19 13:42:05 EST 2004 | blu_nozer
J-STD-001 is the workmanship standard. IPC-A-610 is a guide to evaluating conformance to the standard & includes photographs of compliant and non-compliant examples. In addition there is also IPC-HDBK-001 which expands on the bare requirements laid d
Electronics Forum | Thu Feb 05 14:30:29 EST 2015 | chsravan
Can I apply IPC-610 class 3 workmanship standards to an assembly made with a IPC-600 class 2 PCB?
Electronics Forum | Fri Feb 06 18:32:59 EST 2015 | chsravan
Hi Scott,Thank you for the response. I was also thinking the same that the assembly will no longer be Class III. Thanks again.
Electronics Forum | Fri Feb 06 11:11:04 EST 2015 | mascott123
I have asked that same question to a co-chair of the J-STD-001 committee who in turn checked with personnel at IPC. The answer I received is that yes you can apply the Class 3 assembly requirements using a class 2 PWB but the resultant assembly will
Electronics Forum | Tue Mar 20 15:33:28 EST 2001 | CAL
Susan- My son would be very happy if you would guarantee his happy meal electronic toy for five years. As previously noted, "workmanship" is the key. CAL DRISCOLL CONTRACT MANUFACTURING, Inc. (if there were such a company) would build to IPC 610 or
Electronics Forum | Tue Mar 17 08:20:59 EDT 2009 | scottp
I work for one of the largest automotive suppliers. Our Workmanship Standards pre-date IPC-610 but they are nearly identical in regards to solder balls. We supply to all the major OEMs, including the Japanese, and I don't recall our solder ball sta
Electronics Forum | Mon Apr 10 16:18:56 EDT 2000 | Mark Belec
I need some input to clear up some confusion I have with regards to what standard I should be using for workmanship on the pcb assemblies we produce. Should I be using the IPC 610b or the ANSI-J-STD-001B? What is the norm for the industry or is the
Electronics Forum | Thu Dec 07 13:51:59 EST 2006 | ganoi
I need advices as to how a gap between the bottom of an LED (1209-package) and the PCB can be controlled on a small rigid-flex PCBA? The problem that we experience is due to tight tolerance in the design of our molded housing in which this PCBA is as
Electronics Forum | Fri Jan 26 16:24:10 EST 2007 | Bob R.
Whether there's a fillet or not depends on the component type. Most have a fillet but some, such as QFN's, don't necessarily have one. Have a look at IPC-610D Workmanship Standards to understand when you should expect one and when you shouldn't. T
