Electronics Forum | Mon Nov 14 03:48:18 EST 2022 | frankchan
Maybe also check the air pressure, the lack of air pressure could also sometimes make the head lose grip on the nozzles
Electronics Forum | Mon Nov 14 14:42:11 EST 2022 | cyber_wolf
Air pressure has nothing to do with that error.
Electronics Forum | Tue Nov 15 00:33:42 EST 2022 | frankchan
That is right, air pressure would be a higher level of malfunction and reported on the main screen, maybe also try maintenance of the head, cleaned up and oiled them, anyway I'm speaking of experience based on the old days when I using the Fuji serie
Electronics Forum | Tue Nov 09 22:20:09 EST 2021 | nrauworth67
Looking to buy this ASAP
Electronics Forum | Wed Nov 10 01:04:12 EST 2021 | sophyluo1985
Please contact us GOLDLAND,sales07@goldlandsmt.com
Electronics Forum | Mon Dec 27 15:19:32 EST 2021 | nrauworth67
Thank you
Electronics Forum | Thu Dec 23 01:58:28 EST 2021 | davef
Two things [1} Sophy at Goldland is fabulous at responding to posts like this she is all over it [2] don't forget that you can submit RFQ at the SMTnet Mart [https://smtnet.com/mart/]
Electronics Forum | Tue Oct 24 19:09:12 EDT 2023 | sarason
Possibly blocked air lines did you check air pressure? Also drivers on the relevant boards. or simply damage in the flexible wiring harness( a nightmare) sarason
Electronics Forum | Tue Jul 05 16:29:27 EDT 2005 | stepheniii
The air kiss is to replace the vacuum with air so the part will drop off the nozzle. Every machine I've seen with Air kiss, uses it when discarding a part as well as when placing a part. The air kiss should not be strong enough to blow the nozzle off
Electronics Forum | Mon Sep 20 20:43:19 EDT 2021 | ttheis
One of our GSM machines started having an issue with "spitting" parts onto the board / blowing them around. I determined the problem be that spindle #2 on our flex head is not touching the parts all the way down to the board. It is stopping just abov
.gif)