Electronics Forum | Tue Oct 24 19:09:12 EDT 2023 | sarason
Possibly blocked air lines did you check air pressure? Also drivers on the relevant boards. or simply damage in the flexible wiring harness( a nightmare) sarason
Electronics Forum | Fri Apr 02 14:21:58 EDT 2021 | sacd
deleted
Electronics Forum | Tue Oct 20 23:14:01 EDT 2015 | kiwiguy12345
Hi, I have struck a problem with the X axis on my Juki 740. As soon as I "home" the machine the X driver displays the code "961" Does anyone have any ideas as to a solution for this problem? Thanks!
Electronics Forum | Mon Jul 05 11:16:50 EDT 2021 | aurash
Not sure if you fixed the problem in the meantime but try to disable the Z4 head to see if the problem actually belongs to the 4th head. Sometimes a totally unrelated problem is manifesting on the head. (I had communication problems between the XMP c
Electronics Forum | Fri Aug 28 19:54:05 EDT 2020 | emeto
From what you explain: 1. check all movements X,Y and Z are moving free while machine is off. 2. Resit all driver cards. 3. Check interface cables or boards. Not sure if Juki is using CAN or other interface standard, but random motor errors might be
Electronics Forum | Fri Aug 26 10:55:31 EDT 2022 | kumarb
a DOS USB stack will be required. If Windows -> the USB driver for this device will be required. If Juki has a custom OS then even less of a chance of a success. In all cases, you are introducing far too many layers of unnecessary software that is d
Electronics Forum | Tue Jan 20 14:18:09 EST 2009 | Doug
Those machines use DOS, so unless you can find DOS drivers for your printer, then I think you are stuck using Dot Matrix, which don't need special drivers in DOS. Plus, I believe those machine use a Japanese version of DOS, so US drivers may not wor
Electronics Forum | Thu Mar 30 08:04:56 EDT 2023 | hub
Hello, I'm looking for zevatech (juki) 570 owner that could help me to resolve my problem. I had the following error that occure just before (or sometime a few after) homing the machine : "E7018:Driver Error KNOCK position error ". Previsously I had
Electronics Forum | Thu Feb 02 14:14:08 EST 2017 | siltron
Hi Muzzy, We are experiencing a similar issue with our Juki KE750, the machine did not perform zero rutine, some of the ALM4 led in the zeta ant theta drivers are turned on, and the SUB-CPU led "FAIL" is also on, did you mean that when your machine
Electronics Forum | Sat Mar 04 11:07:21 EST 2006 | charls
hi pavel, If you are getting vibrate during fast mode, encoder or motor cable might be faulty. yes i faced the same problem in Juki KE2010 m/c. Try by replacing encoder & motor cable from Motor to driver unit. All the best
