Electronics Forum | Fri Oct 13 19:01:46 EDT 2023 | crystalw4280
I have an old Juki 2060 The electors were replaced on some heads that were disabled. Now we are showing some of the same errors with those heads. Does anyone have any suggestions for possible cause that would make this happen again. Another warning
Electronics Forum | Mon Aug 01 12:52:52 EDT 2022 | jojoled
Hi , I am lookingt for somebody who can confirm or definitely reject my expectations...one guy, with some experience with JUKI 740 said, the 740 model it had, and it worked fine....so he is surprised why the newer machine doesnt have it....maybedisab
Electronics Forum | Mon Aug 01 10:31:34 EDT 2022 | spoiltforchoice
I'm not familiar with the machine, but isn't a KE760L an old slow "single head, single gantry" two spindle machine? Any speedup from simultaneous picking would not necessarily be that much of an improvement. Setup as you described is the way I would
Electronics Forum | Wed Sep 04 13:32:22 EDT 2019 | bobpan
Try these things: 1. Do a function 30....your nozzle height should consistently be around 200 +/-20....but whatever number it does find it shouldn't change. (with nozzle on) 2. Most times its the z-bellows....an old z bellows that has a worn out spri
Electronics Forum | Mon Nov 10 23:20:55 EST 2008 | stanyserrao
Light Units are replaced with new if the problem > of lights then it will not vision process the > nozzle center measrement and resolution Jigs > too.. > > Jig is meauring in trace mode and > identifiying all leads which are fine > fitch. > >
Electronics Forum | Thu Nov 30 22:11:25 EST 2017 | techedge
I have two KE720 P&P machines. I've been using one for the last several years on an irregular basis because we manufacture into a niche market and I don't (currently) contract out our services. Six months ago the working KE720 stopped working and I'
Electronics Forum | Wed Nov 21 15:37:46 EST 2007 | afm
We have been looking for an old machine (budget issues), and we have foud Juki 570L and Quad IVc to be around same cost. I have found some comments on the forum for the Quad (good in general), but not too much for the Juki. Beside the expected issues
Electronics Forum | Fri Jul 29 06:48:11 EDT 2022 | jojoled
I have old JUKI machine, which after power loss seems to have corupted configuration file(all works fine,except Vision configuration for fiducial recognition : camera is unable to read/ write parameters for Vision), can anybody help to tell which fil
Electronics Forum | Fri Jun 15 10:26:12 EDT 2018 | ks0707
Hello everybody, I’d like to hear your advice regarding the programming for multiple Pick & Place machines. My company is a Contract manufacturer located in SF Bay area and has 4 SMT lines with 11 Pick & Place machines. The good thing is that all o
Electronics Forum | Mon Apr 24 01:10:18 EDT 2023 | frankchan
How true, and thanks for your sharing, it's very touching and inspirational. I have been doing business with many customers across the world and with many products. they do say forget your job title, everyone is in sales... ..., that makes everyone a