Electronics Forum | Fri Aug 07 19:05:11 EDT 2020 | glasscake
I was told by Mirtec I could not get any manuals without buying the second owner support. I have a simple manual that goes over making a program, creating parts. That manual covers using the Mount inspect, IC inspect, Chip inspect tools but nothing
Electronics Forum | Thu Aug 18 09:41:05 EDT 2016 | jbuckley
Typically on my company's Mirtec systems, any anomalies, such as cracks, chips, etc. on chip capacitors and chip resistors are going to be detected with just a basic mounting inspector. We have a full image of the part (solder joint not included) as
Electronics Forum | Mon Jan 10 18:35:05 EST 2011 | eadthem
Ive used a Mirtec machine for 3 years MV3L with side angle inspection. Mirtec has some issues documentation, and repair plus. But there machine is impressive and the AOI software is good. We can find about 90-99.99% of all errors using just the 5
Electronics Forum | Wed Feb 06 13:45:39 EST 2013 | phase1
Is there alot more to training than what the manuals spec out? The machine came with training outlines that seem to be a condensed form for programming everything from chips to fine pitch etc. Im not sure if this doccument came from Mirtec or the com
Electronics Forum | Wed Nov 03 12:08:59 EDT 2010 | hegemon
I had an opportunity two years ago to evaluate three benchtop AOI systems. Omron, Yestech, and Mirtec. I was fortunate to be able to have all three machines side by side for my evaluation period, which lasted near a full month. At the time I was
Electronics Forum | Tue Nov 28 05:31:04 EST 2006 | egrice
Lou, You should look at the ERSA/Modus AOI System! The Modus AOI uses a high resolution industrial scanner rather than a camera mounted to a gantry. It's way faster (12 seconds for whole board ) and can do everything that a camera can do and more
Electronics Forum | Mon Feb 07 18:12:56 EST 2011 | eadthem
I do not know what software version you have, but on older versions it is best to have a mounting inspector set to be the primary and then mask out all labels and solder so it just locates the part. Then add another mounting inspector for looking at
Electronics Forum | Fri Nov 05 18:47:31 EDT 2010 | eadthem
I'm guessing when you say bare board you mean wet paste only? When you say the pads move slightly are your boards warped at all at the Vscore? What we do is use per modual fids. first you delete or don't make panel fids and then theres a option wh
Electronics Forum | Thu Feb 07 12:37:42 EST 2013 | phase1
Resistor/Caps using package library Match-45% White pixel solder-25% search window-25% Tant caps custom teach checking for pattern/value Do you also put a polarity band check in there or just check the value and click the polarity box? same passing
Electronics Forum | Thu Apr 19 20:01:30 EDT 2012 | eadthem
some things to consider, Is there flux on the board. are there finger prints on the tops of parts. Is the board warped at the V score from reflow Is the board shifting in the machine during inspection. These are the issues we have had with our mir
The SMTA membership is a network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies and related business operations.
Training Provider / Events Organizer / Association / Non-Profit
6600 City W Pkwy
Eden Prairie, MN USA
Phone: 952-920-7682
winsouce.jpg)