Electronics Forum | Wed Dec 29 07:30:45 EST 2021 | vasu278
Hello, Iam looking for timing pulley for out conveyor and squeezes for MPM accuflex
Electronics Forum | Wed Dec 29 19:08:42 EST 2021 | cyber_wolf
Try these guys. https://www.smtxtra.com/product-category/screen-printers/mpm-speedline-screen-printers/
Electronics Forum | Wed Dec 29 20:14:29 EST 2021 | davef
Post a RFQ to used equipment suppliers on SMTnet here: https://smtnet.com/mart/
Electronics Forum | Tue Feb 01 18:54:03 EST 2022 | proceng1
I have a parts machine. What do you need?
Electronics Forum | Wed Dec 29 12:48:18 EST 2021 | sophyluo1985
Dear Firend Could you send us the details? We can provide you Please email me sales07@goldlandsmt.com, thank you
Electronics Forum | Fri Jul 18 16:04:31 EDT 2014 | comatose
We had this. The anti-backlash nuts were binding. We took them apart, chased the threads with a tap and re-assembled with slightly less pre-load. Hasn't been a problem since.
Electronics Forum | Mon Jul 21 11:01:11 EDT 2014 | dontfeedphils
I dealt with the same issue for a month or so. We jumped through a lot of hoops, replaced both lead screws, verified the motor was good, a ton of stuff. Ended up being an intermittent wire connection between the control board and the conveyor width
Electronics Forum | Fri Jul 18 10:10:21 EDT 2014 | proceng1
We've got an MPM Accuflex printer that generally works great, but we've had a recurring problem. The powered rail (rear rail) fails to initialize. Sometimes all it takes is restarting the machine to get it to work. At the suggestion of the repair
Electronics Forum | Mon Jul 21 06:18:15 EDT 2014 | digar
We had this. The anti-backlash nuts were binding. > We took them apart, chased the threads with a tap > and re-assembled with slightly less pre-load. > Hasn't been a problem since. > We had this. The anti-backlash nuts were binding. > We took t
Electronics Forum | Fri Jul 25 10:13:01 EDT 2014 | cgreiner
We also had this problem and found similar results with the anti-backlash nuts binding. We went through the process of cleaning the lead screws and the nuts which resolved the problem for about 6 months only to have it return. We learned that the
