Electronics Forum | Mon Jun 12 23:52:58 EDT 2017 | aemery
Don, either you have a faulty park sensor or much more likely the vision gantry Y axis is not reaching the sensor. Possible issues, one of the two VY drivers cards is failing; one of the VY forcer motors (air bearings) is failing; to much air leakin
Electronics Forum | Mon Jul 30 17:32:34 EDT 2007 | chrisgriffin
When you teach the "teach boardstop Y" make sure the camera is seeing the leading edge of the board and not too close to the rails. It should calculate the pre-stop position correctly. I assume you have thoroughly checked the sensor. Also check th
Electronics Forum | Wed Aug 28 16:44:05 EDT 2024 | pf
What lubricating oil do you recommend for the air pressure regulator of an MPM AP25 printer?
Electronics Forum | Thu Apr 14 14:29:37 EDT 2005 | shagnasty
MPM Help!? On start up when my machine is comping up to the start screen i'm getting a air pressure fault please help. Email @ hillardb@protekelec.com or call me direct @ (941) 915-5134 Thanks Brian
Electronics Forum | Fri Sep 21 16:57:47 EDT 2007 | chrisgriffin
Harry is right. Too much moisture in the air lines screws up the air cards. These pro-heads are somewhat of a pain to calibrate. I think it is a little pre-mature to say you probably need pneumatic cards. You just need to calibrate the pro-head.
Electronics Forum | Wed Sep 19 04:14:55 EDT 2007 | simmcircuits
Hi, Please help on this problem with an MPM AP25 screen printer. Everytime we print the error Squeegee Pressure Not Set is prompted. Although we can still print by clicking on Next, it beats the purpose of having an automatic printing machine. Can s
Electronics Forum | Thu Sep 20 23:10:11 EDT 2007 | valuems
You have a AP that needs to have the calibration and I expect you need to replace 1 or maybe 2 cards replaced. You probly got water in your air supply. The calibration will not be a easy one and special tools are needed. You can call us if you wis
Electronics Forum | Fri Sep 21 09:43:17 EDT 2007 | cyber_wolf
Harry, How did you come to the conclusion that there is possibly water in the air supply and cards will need replaced from that description. And please explain why the calibration will not be easy. Just curious. Thanks
Electronics Forum | Wed Sep 19 19:48:16 EDT 2007 | simmcircuits
Yes, but it does not continue, it tried to weigh the squeegee but then after trying several times it would come up with an error that the Squeegee Left is not Free (up). Cheers
Electronics Forum | Fri Sep 22 09:06:33 EDT 2006 | daxman
We've got a problem with our AP25.. I just finished repairing and calibrating this printer. We needed to replace the camera. After the cal. was done, the print accuracy was superb. However, it seems now, the consistency will not maintain itself. T
