Electronics Forum | Mon Jan 14 17:36:29 EST 2008 | flipit
SWAG is right on the money. I had a 0.5 mil per pixel camera and a 1 mil per pixel camera. As you increase magnification your focal range goes down. So your part height becomes much more critical. Parts out of focus will be rejected to the dump b
Electronics Forum | Wed Dec 19 18:48:31 EST 2007 | darby
The other thing you could do is fit the cameras with a catseye lens. With my way all the data says the same apart from the fid diameter/shape and logic off/on. Just as accurate as any other method, a lot cheaper - cost = 1 drill, less nerve racking
Electronics Forum | Sun Dec 10 21:40:40 EST 2006 | villu
few days ago the camera picture started jumping like a TV between signals.. the blue Cable between the control board and the computer was Broken (last 3 threads) so we changed it.. but the problem is still there.. tested with another machines Compute
Electronics Forum | Fri Oct 17 12:48:59 EDT 2014 | cyber_wolf
The only reason you would need to run this calibration is if the camera was replaced or the centering camera got whacked which is highly unlikely. If your placements are off, put an offset in the parameter file.
Electronics Forum | Thu May 13 12:24:26 EDT 2004 | cyber_wolf
We have an older line scan camera on our MY series machine.(The one that uses the X wagon trigger/encoder to turn on the line scan)When I go into the service program and turn the line scan camera to "camera action on" the LED's will only stay lit for
Electronics Forum | Wed Dec 29 05:58:04 EST 2021 | sophyluo1985
According to the normal theory and the feedback of our other customers, maintenance is divided into 4 ways. (Depending on the environment of your production workshop, the work head is generally inspected monthly) 1. Daily maintenance: Clean the surfa
Electronics Forum | Fri Mar 02 16:06:36 EST 2007 | peterson
Mydata machines are very solid. They are always upgradable since the base machine is essentially the same. Recent advancements in camera and feeders have increase placement speed. However, this is generally not the machine you would select and expect
Electronics Forum | Tue Feb 17 09:33:43 EST 2015 | emeto
Hello, I have two of these for the last 3 years(MV-7xi). Buy the machine with the best camera they offer and with the telecentric lens - it gives great view and resolution. I had to replace the controller for conveyer open/close on both of them. I a
Electronics Forum | Mon Sep 15 14:14:47 EDT 2014 | riot983
Hi guys, New to the forum. I always read and look around at used equipment but have never posted. Anyway, I operate a Mydata My9 at a small shop and have recently ran into a problem and wanted to get some good advice. An employee of mine cleaned the
| 1 |
winsouce.jpg)