Electronics Forum | Wed Jun 09 23:58:59 EDT 2021 | SMTA-64387687
The electrical test, on those older machines, wasn't very exact. Try to expand the tolerances, 25-30% for caps and 10% for resistors, and see if that solves your problem. Also, if I remember correctly, if you go into the layout and single-place the c
Electronics Forum | Thu Jun 10 16:40:48 EDT 2021 | cyber_wolf
Yes those verifiers seem like a good idea but they really don't work correctly. You would be better off verifying with a meter during reel changes than wasting your life on that thing. I concur that single mount will show the value.
Electronics Forum | Thu Jun 10 17:22:10 EDT 2021 | vtdivtecs
thanks! definitly not the answer I wanted to get, but it's good to hear it. Back when we sourced the machine a few years ago I was kinda against buying it as our production scale is so small it doesn't add a ton of value, BUT the electrical verific
Electronics Forum | Tue Jun 08 22:30:05 EDT 2021 | vtdivtecs
So I am having a little trouble with my mydata MY19. its an older machine picked up used and its had its quirks. recently we tried to start adding electrical verification to our workflow, and had to disable it as we were getting intermittent bad pa
Electronics Forum | Fri Mar 27 12:46:23 EDT 2020 | unisoft
Unisoft has been import gerber only for years to setup assembly, aoi machines, etc. *** Help for Importing GERBER only files for used in programming Assembly, AOI, Test, Selective Soldering machines (X/Y Center, Rot, Part#). Also allows you to cre
Electronics Forum | Mon Aug 23 14:40:59 EDT 1999 | John Thorup
| SMTnetters: | | Does anyone know of a place where I can have some test boards made? I don't need a board with a working circuit, traces or anything like that, but a board similar to those "test boards" that you all see at the Placement Equipment
Electronics Forum | Tue Sep 05 14:31:42 EDT 2017 | rgduval
Create a package, set the mechanical centering to the dimensions of the 8-DFN that you're trying to place, test the centering. Tweak the dimension that's failing. Shouldn't be too much of a problem. An 8-DFN package is nothing more than a rectangu
Electronics Forum | Mon Jun 26 11:35:23 EDT 2000 | Christopher Lampron
Hello, We have had some problems with electrical testing of molded electrolytic and tant caps on our Mydata machines. It appears that the components will test backwards on a polarized cap test. The Mydata uses the rise time to determine polarity. Doe
Electronics Forum | Wed Jun 05 05:14:32 EDT 2019 | chafik
Hi guys, does anybody can help me out to activate the electrical test on my machine "mydata my12", i don't have this option, but i heard that there is a trick to activate this option. Thank you
Electronics Forum | Wed Jun 05 13:07:57 EDT 2019 | tey422
Last time I play with Mydata machine is over 10 years ago. If I remember correctly, you should able to see it when you log in as "higher" user level.
