Electronics Forum | Sun Dec 04 16:54:52 EST 2011 | andersenequipment
I have a mydata tp-11, crap hard drive, When I look to replace the hard drive with another, the machine ask me for a password or passcode. Anyone help?
Electronics Forum | Sun Dec 04 16:40:32 EST 2011 | andersenequipment
I am replacing a hard drive on a mydata tp11. it ask me for a passcode??? does anyone know how to clear this out? it has the original stuff in it. Please advise.. Tom
Electronics Forum | Fri Mar 20 14:30:33 EDT 2009 | KP
I'd like to manually send programs to the machine but I'm not sure where the files are stored.
Electronics Forum | Mon Mar 23 11:29:25 EDT 2009 | KP
Thanks. Placing the .pcb file in the spool dir worked. What about the layout file? I can manually create one and import that through tpsys but I'm wondering if there is an easier way to do that.
Electronics Forum | Thu Feb 20 13:16:15 EST 2014 | rgduval
Hi, Brendan, It sure sounds like it to me. But, with the Z axis, there could be one other thing to check. On my old TP, there were z-locks...two pistons that pointed sideways around the head travel. Initializing the z-motors did not move the z-
Electronics Forum | Thu Feb 13 09:52:03 EST 2014 | rgduval
Start by getting into the maintenance menu, and manually installing the Servo program for all MOTs. If they install fine, you can check the Z-motor while you're in the maintenance menus. Make sure that the z-locks are unlocked before checking the
Electronics Forum | Thu Feb 20 13:25:18 EST 2014 | brendansales
Dear Rob, Thank you for your quick response! There were Z locks on the Midas head area, 2 little solenoids like you mentioned. Previously I had the first error code (F-AXIS-C/9) and after fiddling around, randomly manual unlock the Z locks it came
Electronics Forum | Fri Mar 27 12:46:23 EDT 2020 | unisoft
Unisoft has been import gerber only for years to setup assembly, aoi machines, etc. *** Help for Importing GERBER only files for used in programming Assembly, AOI, Test, Selective Soldering machines (X/Y Center, Rot, Part#). Also allows you to cre
Electronics Forum | Wed Mar 25 18:34:34 EDT 2020 | spoiltforchoice
> What about designators? Using gerbers to program > a pnp machine was always a last resort to be done > only after much complaining and begging for > proper CAD data. Back in the day I used UniCAM to > program a mydata. After gett
Electronics Forum | Fri Apr 10 09:59:13 EDT 2020 | spoiltforchoice
> We unfortunately use GERBER data to digitize <BR> > boards more than any CAD. We are CM and many of <BR> > our customers do not provide CAD. With some <BR> > Legacy products, we still use 274-D Gerbers
