Electronics Forum | Sat Jan 29 04:59:02 EST 2005 | Grant
Hi, MYDATA's are ok for lower volume, and they are very flexible. If you only have 1 or 2 trays of components and are on a tight budget, then you can even place the trays on the Y wagon behind the PCB so you can get away without the tray wagon. Al
Electronics Forum | Wed Feb 19 09:52:45 EST 2014 | brendansales
Dear Rob, Got to the maintenance menu, under the Motor section, I selected Z motor and tried to initiate motor, there was no movement on the machine and I had the error message as below: F-MOT-MSETDYN Z/12: Position counter dead I suspect that ser
Electronics Forum | Thu Feb 10 14:27:07 EST 2005 | cyber_wolf
First of all, whom are you getting it from ? Mydata, or a used equipment broker. If you can tell me what machine type you are looking at, then I can tell you what to look for. (MY-series, or TP series) Most important things right off the bat: *Machi
Electronics Forum | Tue Dec 21 12:28:11 EST 2021 | vtdivtecs
hey all, I had a comically bad failure yesterday while working with my pick and place, a part got dropped at exactly the wrong moment and flung a bracket up into the tool path, severely damaging the hydra controlboard that is next to the x camera. T
Electronics Forum | Tue Apr 04 16:17:27 EDT 2017 | bk
Does your my9 have any cameras aside from the x wagon camera and hydra camera? I believe you need a camera aside from these 2 such as a line scan camera to be able to use the auto teach option.
Electronics Forum | Tue Sep 29 13:59:08 EDT 2009 | cyber_wolf
The Hydra camera is a linescan camera on our machine.
Electronics Forum | Sun Dec 10 21:40:40 EST 2006 | villu
few days ago the camera picture started jumping like a TV between signals.. the blue Cable between the control board and the computer was Broken (last 3 threads) so we changed it.. but the problem is still there.. tested with another machines Compute
Electronics Forum | Wed Mar 02 11:09:10 EST 2011 | cyber_wolf
I highly doubt they will even sell you the camera without setting up a service call.
Electronics Forum | Mon Jul 04 22:09:08 EDT 2005 | grantp
Hi, I have one for sale, do you want it! MYDATA machines are perfect for low volume high mix production, and are fairly easy to operate. Don't get a TP model, as they cannot take the HYDRA head, and the MY series are much better. The good thing is
Electronics Forum | Wed May 08 11:20:24 EDT 2013 | amelby
Thanks for the info on the Hydra tubes that will be helpful. I found the answer from one of the Mydata techs. The Camera needs the hydra head to go slower then 1.9m/sec and the setting was at 1.8m/sec. They found out that even if the machine was set
