Electronics Forum | Wed Mar 23 23:00:17 EST 2005 | pmd
Problem solved. Thru the help of MyData support we have determined that older MyDatas have a software issue with the servo drivers. A newer rev of driver will fix this problem.
Electronics Forum | Fri Mar 11 09:42:50 EST 2005 | cyber_wolf
If you are not getting repeatable transducer readings then some possiblities are : 1. Transducer is bad 2. Motor is bad 3. Y power booster Also, I can't remember if the Y motor has a flex coupling on it or not. If it does, check that out. Also, w
Electronics Forum | Wed Mar 16 17:43:33 EST 2005 | pmd
We grease acording to PM schedule. The cable is very old about 5 years. We run 2 shifts. The transducer program and burnin test show the varance that we are seeing phisically so I can rule out the transducer. The motor may be the cause as it is of 19
Electronics Forum | Thu Mar 10 23:23:56 EST 2005 | pmd
We have a MyData TP-9-2 with a in line Y wagon. It is a long screw and the vintage is 1994. The Y wagon vibrates at about 24 micrometers at about 25 hertz. Burnin reviels zero encoder pulse errors. Hystersis test indicates a Y axis Y wise varance of
Electronics Forum | Sat Jan 29 04:59:02 EST 2005 | Grant
Hi, MYDATA's are ok for lower volume, and they are very flexible. If you only have 1 or 2 trays of components and are on a tight budget, then you can even place the trays on the Y wagon behind the PCB so you can get away without the tray wagon. Al
Electronics Forum | Wed Jul 13 08:42:02 EDT 2005 | mikeattekfab
I am looking for an additional Tray wagon for our Mydata machines, anyone have a working one they do not need? Please let me know. Mike
Electronics Forum | Wed Sep 11 11:28:10 EDT 2019 | cyber_wolf
What is the error message ?
Electronics Forum | Thu Sep 12 16:37:26 EDT 2019 | emeto
If we assume Mycronic equipment, you have some erroe in your tray creation.
Electronics Forum | Mon Sep 16 04:11:57 EDT 2019 | richgreen01
Hi, Theta unstable, it picks the part but doesn't rotate it. Regards Richard
Electronics Forum | Tue Sep 10 05:39:04 EDT 2019 | richgreen01
Hi all. I have put.an ic on the y wagon and done first.and last component. The machime picked up the part while testing the package but it didnt center the part ,just sat there for a while and failed. Any idea why this is and am I missing something?
