Electronics Forum | Wed Nov 20 02:51:49 EST 2024 | ttheis
We had a similar problem on our spartan wave machine after many years of operation. The people at Novastar were kind enough to provide the details to restore the controller's settings. See photo.
Electronics Forum | Thu Sep 16 13:12:43 EDT 2010 | gregcr
Hi All, We have been running a Novastar spartan 8S wave solder machine for a number of years. We actually do very little wave soldering and this machine has served us well. I have always been of the opinion that with the small pot and simple fluxe
Electronics Forum | Sat Oct 27 12:52:58 EDT 2007 | gregcr
We do very little wave soldering, maybe once a week. We have been running a Novastar Spartan 8S for years with very good results. I do wish we had the wider 12S for the wider boards, but it has only come up once in 7 years. I think there is a lot
Electronics Forum | Sat Nov 09 19:48:21 EST 2024 | g1638
Hi everyone, I'm facing a problem with our Spartan 12D wave soldering machine, and I'm hoping someone might have some insights or suggestions on how to resolve it. Here's the situation: Background: We received a new main controller card and wave h
Electronics Forum | Fri Dec 18 20:27:44 EST 2015 | rowsail
Thanks, I was able to get a PDF of the manual which describes: 1. INSTALL EXTERNAL THERMOCOUPLE PROBE. 2. TURN ON MAIN POWER: a. Press ENTER button b. Press F1 or F2 to scroll to SET UP mode c. Press F3 to select SET UP mode d. Display will read EN
Electronics Forum | Wed Dec 03 06:04:10 EST 2014 | spoiltforchoice
Manual placement aids are often very similar, I would suggest it is quite difficult to tell them all apart. Most of them include some kind of carousel for bins of loose parts and have the option of a few tape "feeders". If you are building small volu
| 1 |
.gif)
