Electronics Forum | Thu Mar 19 09:31:43 EDT 2015 | cotinc01
We offer a custom CP-8 Nozzle with 0.3mm taper tip that can handle 01005 components. Please email me at zshook@cotinc.com for pricing. Best regards, Zach Shook
Electronics Forum | Wed Feb 07 23:33:13 EST 2007 | KEN
It's been a while on that platform, but isn't there supposed to be a 0.3mm nozzle compliance when at Z0?
Electronics Forum | Tue Nov 03 16:28:53 EST 2009 | davef
We have never dispensed adhesive for 0402, but here's your rules of thumb: * Nozzle diameter should be half the desired glue dot diameter. * Minimum of 0.010" gap between the adhesive and pad, both sides. We'd guess that you should be using a 0.3mm
Electronics Forum | Wed Feb 27 04:23:13 EST 2008 | fujillews
Hi It is best to fit the VGA camera for 0201 parts make sure your software is high enough..above v1.33 although you can place without but no so good. 0.4mm tapered nozzles are best. 0201 feeder the locator base in increased by aprox 0.3mm and the ind
Electronics Forum | Wed Sep 04 13:58:36 EDT 2019 | smrsteve
Hello Bobpan, Thanks for the response. 1. Function 30 gives me a consistent 182-185, even after nozzle changes. I can vary this by changing mod code 15 and I have been advised to aim for 90-110, but it doesn't seem to make any difference so I've go
Electronics Forum | Wed Apr 07 03:44:40 EDT 2010 | jackevest
The missing rate spec. of normal machine is under 0.3%, for our experience 0.1% is normal for average, if you can maintain the machine well, like the nozzle cleaning, feeder maitain...you can keep the 0.05%.
Electronics Forum | Mon Mar 15 01:38:46 EDT 2021 | researchmfg
Thanks for the answer. Did you really find the dust block the nozzle and sensor? By the way, If SMT environment need to control the dust then what size of dust need to be controlled? 0.3um, 0.5um or 10um?
Electronics Forum | Fri Mar 12 01:18:00 EST 1999 | Dean
| Okay, I would like to hear everyones ideas for PD naming conventions for FUJI. We are trying to use your basic names "3216_CAP" to a "MQFP208AD" But it is way out of control. Different part sizes, and vendors make it very tough to keep it all th
Electronics Forum | Thu Mar 01 09:14:12 EST 2001 | angela_gong
yes, it is a Black Belt training,instead of 5 days, it is a 20 days traing during 4 mothing, with a project. I just kick off my project lastday. when the pick up avalability is alreday over 99.5%, how to increase another 0.3%, so difficult, so many
Electronics Forum | Tue Aug 06 13:29:39 EDT 2024 | poly
I'm having a lot of trouble placing a long thin connector (DF40C-100DS from Hirose) all my other parts including 0.3mm pitch parts are placed very well, but this part is much longer than anything else and is often placed with rotation or position err
