Electronics Forum | Wed Feb 01 11:51:06 EST 2017 | sachinverma
hi plz update the plc program.
Electronics Forum | Wed Jul 24 06:20:11 EDT 2013 | JB
Hello, we have just bought a used nutek ntm110l and are looking for an instruction manual, anyone know where I can download one? Issue we have is that the bottom conveyor is constantly running, is there anyway to stop it? until we load a rack? some j
Electronics Forum | Wed Jan 30 11:52:51 EST 2013 | mccabekev
We have a Nutek NTM 410L-500-1 sitting between our screen printer and p&p machine. The problem we are having is that this conveyor will constantly show board ready unless the red button is held down. What we really need is the board to stop at the
Electronics Forum | Wed Jan 30 14:07:58 EST 2013 | markhoch
Have you tried contacting Nutek Customer Service? They should be able to help you. http://www.nutek.com/
Electronics Forum | Thu Jan 05 14:46:48 EST 2017 | dcarlson
We just got a used Nutek buffer, NTM640SXL, and I cannot figure out how to change the pitch on it. We have another Nutek buffer that I can change no problem, but for some reason, this one isn't changing. Is there anyone out there that can help? Th
Electronics Forum | Thu Jul 25 09:32:38 EDT 2013 | chris_flex
We have the same magazine-loaders. It´s not possible to stop the bottom conveyor. It`s hardcoded in the plc , you have to modify the plc-program to change this functionality. The instruction-manuals are also not generic as there are some different ve
Electronics Forum | Thu Jul 25 16:13:46 EDT 2013 | markhoch
We occasionally have the same issue with ours, but it is caused when the sensor, (that is supposed to detect when the magazine has emptied), has been knocked out of alignment. If you a transmitter/sensor set mounted at the exit end, make sure that i
Electronics Forum | Fri Jul 26 04:21:24 EDT 2013 | chris_flex
You`re right this is also a possible reason. But we have 2 Loaders from 1997 here where the error comes from the plc-program . Although all sensors are working fine the bottom conveyors are always running. We`ve planned to modify the program. BR
Electronics Forum | Tue Jul 30 12:06:20 EDT 2013 | JB
I've checked the sensors and they look ok, I'm guessing its the plc-program then. If you get it working i'd be interested in knowing how to do it to ours. Already checked with Nutek and the manual is quite expensive so I guess we'll do with out it.
Electronics Forum | Wed Mar 04 22:24:28 EST 2015 | SKR
We are using Nutek NTM4910-XL laser marker to etch 2D barcode on all our boards. We added solid silkscreen box on all our boards to create contrast. When we laser etch them, we just burn the silkscreen box so that we can see the soldermask under it c
| 1 |
