Electronics Forum | Fri Aug 07 09:26:48 EDT 2015 | jorge_quijano
Hi Mike, if you still interested in the Inside B benchtop, I have One that my Company bought for demo, it is available now. Send me an email and we can discuss. Regarla, Jorge
Electronics Forum | Wed Aug 22 07:24:34 EDT 2012 | ericrr
how about this for resistor & capactors with 4mm pitch, all measurements in millimeters. cell A1 "Input inside diameter" answer in cell B1 cell A2 "Input outside diameter"answer in cell B2 cell A3 "Input layer width,(from inner to outside layer) (no
Electronics Forum | Thu Jul 18 12:44:24 EDT 2013 | ericrr
after checking two computers, did not find it. However after using "google" found it in a flash. (less than 0.22 seconds) using a spreadsheet. how about this for resistor & capacitors with 4mm pitch, all measurements in millimeters. cell A1 "input
Electronics Forum | Thu Dec 16 23:17:02 EST 2010 | Jacki
Hi Kim Dun take any risk in delamination bcoz u will be the person to answer for being it. So, we do bake all Pcbs, which have 3months of shelf life, b4 startin any process although they are still inside the factory packs.
Electronics Forum | Fri Jan 10 04:42:14 EST 2020 | richardcargill
SOLVED !! Booting up into DOS there's a file called optedt.exe in the AP folder. This is the option editor. It's password protected when you run it, but a quick look inside the code solved that one. QMPM gets you in if you need it
Electronics Forum | Wed Feb 28 00:12:22 EST 2007 | Muhammad Haris
hi, Consider BGA1= bigger one BGA2= smaller one CONSIDERATION : 1. If bga2 is inside the bga1 then bga1 balls should not touch the bga2 upper surface i.e. the inside balls of bag1 package should b in ur mind, so choice is urs. METHOD: m
Electronics Forum | Wed Sep 18 18:40:05 EDT 2002 | dougt
Here is how smema works: Machine A has a board to give to machine B. Machine A has an opto or a relay that will turn on or close when it is ready to pass this board to machine B. This is the "board available from previous" signal, telling machine B
Electronics Forum | Tue May 25 13:03:35 EDT 2010 | jdumont
Hello, I have no experience with CE-1155 but a ton with 1B73. I would say Justin hit it right on the head. 1B73 does not like to be anywhere near silicone residues. We make sure the boards are handled with gloves after wash, before coat. Unfortunat
Electronics Forum | Tue Jul 17 00:10:32 EDT 2012 | amitsindwani
Referring to IPC/JEDEC J-STD-033B.1 section 3.3.2.2 'The amount of desiccant used, per moisture barrier bag, shall be based on the bag surface area and WVTR in order to limit the interior relative humidity in the MBB to less than 10% at 25°C.' So wha
Electronics Forum | Sat Aug 25 08:39:15 EDT 2007 | gsala
If plastic Carrier Tape (CT)/ emboss tape, is made by: a)Polycarbonate material, it can withstand temperature around 120C� or may be more mantaining original dimension. b)Polystirene material, at max 45�C-50C� the CT starts to change dimensions and
winsouce.jpg)
