Electronics Forum | Fri May 20 09:13:58 EDT 2011 | ck_the_flip
We have issues with the Philipps Luxeon Rebel LED where the part sticks to the cover tape during advancement. This causes the part to get flopped around in the pocket or the component gets dropped and damaged when the feeder advances. Has anyone ex
Electronics Forum | Fri May 20 09:50:10 EDT 2011 | blnorman
Have you checked for ESD?
Electronics Forum | Fri May 20 11:14:08 EDT 2011 | davef
While you're waiting for others to reply, search the fine SMTnet Archives. For instance, look here: http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=61842
Electronics Forum | Sat Aug 18 23:03:07 EDT 2012 | eadthem
We have had this problem in the past, On paper tape resistors(old stock from before i took over and forced rotation on everything) and on embossed (national semi parts, strings of glue pulled back like seat belts across the pocket.) For the national
Electronics Forum | Mon Oct 04 09:27:43 EDT 2010 | floydf
We have found that the lenses on the Rebels have are gooey and sticky. We put a little bit of WD40 on the shutter part that contacts the lens. Just a little bit. Basicly, put a drop on and try to wipe it all off with a paper towel is enough.
Electronics Forum | Fri Aug 04 09:17:57 EDT 2000 | JAX
Dougie, More info needed. (What type of feeders, Have they been modified for the different packadge types, Are the parts sticking to the cover tape or inside the plastic carrier tape........)
Electronics Forum | Fri Feb 18 13:15:10 EST 2005 | need help
we are having problem with the flipchip sticking to the tape and reel cover, jumping around the tape pockets, and double stacking at placement during production. Does anybody else have this problem? Does anybody have a solution.
Electronics Forum | Sat Feb 19 09:31:30 EST 2005 | davef
Potential causes are: * Static charge [get a deionizing fan] * Adhesive on the inside of the cover tape [fix your supplier]
Electronics Forum | Mon Feb 21 03:56:34 EST 2005 | abhirami
Agree with Davef. Smaller the chip, more the static charge. I used to see this even with normal chips. Get an ionizer blow. It should solve your problem. May be switch to antistatic tape if affordable.Regards. GV
Electronics Forum | Mon Feb 21 12:51:30 EST 2005 | need help
Thanks for your help. We try the de-ionizer fan, helps some what but did not eliminate the problem. Can you tell me which model are you guys using.
