Electronics Forum | Mon Jan 10 17:07:51 EST 2022 | goldendragon
Hello Team, Do you have belts for these PCT WS1010 and PCT CV1010? Appreciates!
Electronics Forum | Wed Jun 07 23:57:22 EDT 2017 | marcelll
Hi, Try to find replacement edge belt pulley for old PCT conveyor. Any idea where to find a supplier to buy small pulley for 1/4 inch edge belt ? Thanks
Electronics Forum | Thu Jun 08 08:05:22 EDT 2017 | dleeper
A couple of places to try: https://us.misumi-ec.com/ or http://www.sdp-si.com/
Electronics Forum | Mon Mar 27 07:36:15 EST 2006 | Loco
Soltec prescribes Turmofluid 40b. Seems to work ok.
Electronics Forum | Tue Jan 16 07:36:52 EST 2007 | leemeyer
Yes, these 2 pins are jumpered together. Thanks
Electronics Forum | Thu Oct 14 08:14:36 EDT 2010 | rway
We use both Panasonic and JOT. JOTs are a good conveyor. The Panasonics will probably cost you less. Check the used equipment market. That's where we got all of ours and I haven't had any issues with any of them except the normal where and tear o
Electronics Forum | Mon Mar 20 08:36:30 EST 2006 | jdengler
I've never had this problem on an Omniflo oven, but have seen it on others. It has always turned out to be mechanical. A bearing going bad or FOD in the rails. I would pull the chains and carefully check each link of both chains, all of the bearin
Electronics Forum | Fri Dec 07 13:38:06 EST 2007 | ehess
Does anyone kbnow where I can find replacement belts for the old PCT (Process control Technologies) conveyors?
Electronics Forum | Thu Dec 13 09:55:18 EST 2007 | cyber_wolf
How do you melt it together ?
Electronics Forum | Fri Dec 07 14:44:35 EST 2007 | actech
I have ordered 3/16th and 1/4 from McMaster Carr in the past. you buy it bulk cut it at an angle and melt it together. I think its Mcmastercarr.com and look into belts or conveyor belting you should be able to find it online there.
.gif)
winsouce.jpg)